Re: ADSL and SpeedTouch 510

From: _____ (notme_at_nospam.net)
Date: 11/05/03 

Date: Wed, 5 Nov 2003 10:44:54 -0000

Can you get access to the Internet with the IIS machine?
If not, read on.
My 510 came with the default IP adress 10.0.0.138.
So I guess that if your 510 was not "tampered" by your ISP,
your IIS should be running with 10.0.0.1 (or similar) as the
IP address.
You must have static IP adresses in the inside machines that
you want to open to the outside.
If you have the 510 working as a DHCP server, change the
scope of IP adresses that it provides so as not to cover the
static ones.

me

"Jason" <no@mail.com> wrote in message
news:N3Lpb.178213$bo1.28638@news-server.bigpond.net.au...
> Hi.
>
> I have just switched across from Bigpond cable to ADSL
using a SpeedTouch
> 510 (don't ask why!). I don't know too much about
configuring the firewall
> side of things but I want to open up access to my IIS
webserver (same PC)
> for external Internet users.
>
> I tried adding a NAT entry using the web interface by
specifying the
> internal IP address of my machine (192.168.0.1) for port
80 and an external
> address of 0.0.0.0. This didn't work so as a test I tried
turning off
> firewalling entirely by using the CLI "ip config
firewalling=off" but this
> still didn't work either.
>
> I am now stuck and can't figure out why this is not
working.
>
> Any help is greatly appreciated.
>
> Thanks,
>
> Jason
>
>
>

Relevant Pages

  • Re: Understanding Firewall-1 Configs
    ... You should not fear of an attack taking down the firewall, ... port 53 to the DNS server port 80 and ... >You are not able to ping the firewall from the Internet. ... >- -on port 80 to public ip address of IIS is NAT's to internal IP address of IIS ...
    (Security-Basics)
  • Re: Cant access RWW,company web works
    ... everything works fine inside LAN and over Internet! ... The issue may be caused by the IIS configuration. ... Try to access the RWW site ...
    (microsoft.public.windows.server.sbs)
  • Re: OWA/RWW question
    ... Thanks, Crina, I think the latter part will help, I had at one point ... changed the IIS server IP address due to a router switch and may not ... entire Web site from the Internet" is selected. ...
    (microsoft.public.windows.server.sbs)
  • Re: How to enable Analysis Services with IIS on Win 2K
    ... IIS is allowed to access your cubes. ... > "For the outside" means outside of my LAN or through the Internet. ... > inside the Firewall - in my case small Linksys Cable/DSN router, ... > open only and it is pointing to the Web server. ...
    (microsoft.public.sqlserver.olap)
  • RE: SBS SP1 upgrade issues
    ... was already properly set ... Open IIS MMC, right click Default Web Site and then click Properties. ... you can find the path for IIS log file. ... Open Internet Information Services Manager console in ...
    (microsoft.public.windows.server.sbs)