Re: Netscreen 100 password

From: Jens Hoffmann (jh_at_bofh.de)
Date: 10/28/03 

Date: Tue, 28 Oct 2003 18:41:33 +0100

Hi,

Ravage <ravageiwise@hotmail.com> wrote:
> Thanks, but unfortunately that does not work. It must be the old
> hardware but the pinhole reset has no effect. Maybe a jumper has to be
> moved to make that work? Any other ideas?

AFAIK "factory reset" in old netscreens is literally that.
Return to factory for a reset.

Greetings,
   Jens

Relevant Pages

  • Re: Factory reset - where are my files?
    ... I decided as everything was so slow even on boot up that I had better do a factory reset - the PC reset software told me data files would not be affected so I went ahead. ... Well, don't give up hope yet, as I do not have, and have never had a Compaq computer. ... But Compaq is an OEM like Dell and Dell also ships it's computers with a hidden partition on the HD that acts as what you call a "reset". ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Moose Z1100 Dialing Problem
    ... The alarm company tech did put the butt set on the tip and ring ... but we did not do the factory reset. ... If I do the reset, I will lose the phone numbers and will need to get ...
    (alt.security.alarms)
  • Re: WAP54G firmware upgrade goes awry
    ... Would it be possible to do a factory reset on them in software before ... but it might be easier than swapping them ... If I did the factory reset first, I would not be able to talk to them again. ... upgrade reset the router to factory specs. ...
    (alt.internet.wireless)
  • Re: linksys wga54g
    ... It looks like simply pressing the reset button does the factory reset, ... Not sure if you can reload the firmware via tftp, ...
    (alt.internet.wireless)
  • Re: asrock, problem with nic after windows-boot - Exact Opposite issue the OP is having
    ... power-cycle (or front panel reset button), ... I like to think of myself as more of a 'hardware' guy than 'software' ... opposed to a *cold* boot, - since also the RAM doesn't necessarily get ... of being away, I booted up (into GRUB, then chose Debian) and could not ...
    (comp.os.linux.networking)