Re: Netscreen 100, Alteon Aceswitch 180, Cisco switch

From: Mag (mthorne_at_sprinthosting.net)
Date: 05/09/03 

Date: 8 May 2003 15:16:32 -0700

My Alteon doesn't have such a command.

> Real server 1 # pwd
/cfg/slb/real

>> Real server 1 # .
------------------------------------------------------------
[Real server 1 Menu]
       rip - Set IP addr of real server
       name - Set name real server
       wght - Set server weight
       mcon - Set maximum number of connections
       tmout - Set minutes inactive connection remains open
       bkup - Set backup real server
       intr - Set interval between health checks
       retry - Set number of failed attempts to declare server DOWN
       restr - Set number of successful attempts to declare server UP
       remot - Enable/disable remote site operation
       proxy - Enable/disable client proxy operation
       ena - Enable real server
       dis - Disable real server
       del - Delete real server
       cur - Display current real server configuration

>> Information# sys

System Information at 14:35:52 Thu May 8, 2003

ACEswitch 180
sysName: sysLocation:
Last boot: 18:17:28 Sun May 4, 2003 (power cycle)

MAC address: 00:60:cf:40:0b:80 IP (If 1) address: 10.0.0.2
Hardware Revision: 2
Hardware Part No: 200009P20
Software Version 5.2.38 (FLASH image2), active configuration.

Do I need to upgrade?

And on my diagram...
   FW
   |
  ---------------
    | | |
 Alteon Web1 Web2

The line is the switch.

Port 3 is the firewall. Port 5 is the Alteon. And that's what the
switch is complaining about.

-Mag

Relevant Pages

  • Suggestion wanted in regards to Loadbalancer/SSL Offloader
    ... The place I work currently uses pairs of Alteon AD3 and Alteon iSD100 ... to do load balancing and SSL offloading. ... on the front end mostly on port 80 and 443, ... On the frontend we have currently some 110 virtual servers but ...
    (freebsd-isp)
  • Expect::Simple
    ... module to telnet to a Alteon 180 layer 4 switch to roll in and out ...
    (comp.lang.perl.misc)
  • Expect::Simple
    ... module to telnet to a Alteon 180 layer 4 switch to roll in and out ...
    (comp.lang.perl.modules)
  • Expect::Simple
    ... module to telnet to a Alteon 180 layer 4 switch to roll in and out ...
    (comp.lang.perl.modules)
  • Re: Nortel Baystack 425 HW rev 06 port 26.
    ... Today I received 3 with hardware revision 06 and they ... >> all had a dis-functioning port 26. ... > Just a thought but when the switch is ... > enabled for stacking port 26 is disabled, ...
    (comp.dcom.sys.nortel)