Re: sygate won't allow udp to 255.255.255.255

From: \ (dvader@deathstar.mil)
Date: 02/27/03 

From: "\"Crash\" Dummy" <dvader@deathstar.mil>
Date: Thu, 27 Feb 2003 16:45:11 -0500

>Dave change your filter so the remote addresses in the filter only include
>your ISP's DHCP server(s). Otherwise you leave yourself open to rogue DHCP
>servers.

My ISP's router blocks other DHCP servers. It's been awhile, but as I recall,
the initial request for a lease is broadcast and defining the remote IP blocks
it. 

--
Dave "Crash" Dummy - A weapon of mass destruction
crash@gpick.com
http://lists.gpick.com

Relevant Pages

  • Re: How to manage remote DHCP via firewall
    ... on the same side of the Firewall that the Servers are on. ... with Remote Desktop and "remote control" it. ... > I found the DHCP remote management port is variable, sometimes it is 1164, ...
    (microsoft.public.win2000.networking)
  • Re: IP Addresses Mapping
    ... You can install Adminpak ... on workstations to manage servers and Active Directory. ... Desktop or Terminal Services Remote Administration mode is another way to ... The netsh show clients command for DHCP is another ...
    (microsoft.public.windows.server.networking)
  • Re: sygate wont allow udp to 255.255.255.255
    ... Dave change your filter so the remote addresses in the filter only include ... Otherwise you leave yourself open to rogue DHCP ... servers. ...
    (comp.security.firewalls)
  • Re: networking private and public hosts questions
    ... DHCP isn't going to "help". ... you need to run NAT. ... Move all the Servers to the private side of the Firewall and start ... Controllers must point to themselves in thier DNS Setting and the ISP's DNS ...
    (microsoft.public.win2000.networking)
  • Re: Dynamic DNS, DNS Records & Scavenging
    ... There are two DHCP ... Both the servers are set to update A and PTR records for clients. ... DNS however this doesn't seem to be the case. ... DNSUpdateProxy and when i did this i saw my test laptop register its ...
    (microsoft.public.windows.server.dns)