Re: WatchGuard SOHO and Terminal Services
From: Tom Frank (tommy80@hotmail.com)
Date: 01/21/03
- Next message: Robert Cerny: "Disabling direct connect using iptables"
- Previous message: Art Wakefield: "BEFSW11S4 Getting alot of traffic from broadband"
- In reply to: Frank Py: "WatchGuard SOHO and Terminal Services"
- Next in thread: Frank Py: "Re: WatchGuard SOHO and Terminal Services"
- Reply: Frank Py: "Re: WatchGuard SOHO and Terminal Services"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
From: Tom Frank <tommy80@hotmail.com> Date: Tue, 21 Jan 2003 08:49:02 -0500
On Tue, 21 Jan 2003 01:56:32 GMT, Frank Py wrote:
> We have 3 people that Terminal Service into a Windows 2K Advanced Server. Is
> anyone familiar with the WatchGard SOHO Firewall custom Service
> configuration? Having trouble connecting externally now. Current custom
> service settings:
> Service Name: Terminal
> Protocol Settings: tcp Port: 3389
> TCP PORT: Blank to Blank
> Incoming Filter: "Allow"
> Service Host: This is equal to our adaptor local area connection's IP
> address if I were to run an IPCONFIG at the command prompt.
> From: "Any"
> Host IP Address: 0.0.0.0 Should I fill this in?
>
> Any help appreciated. Thanks.
> Frank
I have configured my SOHO (ver 5.1.6 software) to allow Symantec pcAnywhere
to be accessed from outside my network. Setup is as follows:
Service Name pcAnywhere
Protocol Settings Protocol Port
tcp 5631
udp 5632
Incoming Filter Allow
Service Host 192.168.111.2 (machine running pcAnywhere Host)
>From Any
Outgoing Filter Allow
>From Any
To Any
What tends to be confusing is the combo boxes / edit boxes to Add items to
the Protocol / Post / From / To lists. These are for data entry and have no
ultimate effect once the Protocol / Post / From / To lists are setup (this
was not initially obvious but finally figured it out with some trial and
error - the manual was essentially useless).
If you can get your hands on Microsoft NETMON (comes with Windows 2000
Server and SMS 2.0) then you can sniff the network traffic and make sure
that you don't need to open any other ports for this protocol.
Tommy
Posted Via Nuthinbutnews Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION **
----------------------------------------------------------
http://www.nuthinbutnews.com
- Next message: Robert Cerny: "Disabling direct connect using iptables"
- Previous message: Art Wakefield: "BEFSW11S4 Getting alot of traffic from broadband"
- In reply to: Frank Py: "WatchGuard SOHO and Terminal Services"
- Next in thread: Frank Py: "Re: WatchGuard SOHO and Terminal Services"
- Reply: Frank Py: "Re: WatchGuard SOHO and Terminal Services"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
Relevant Pages
|