Re: Is it possible to access an FTP behind a Linksys befsr41 in passive mode?

From: phoenix (phoenix@fakeaddress.uk.com)
Date: 07/23/02 

From: phoenix <phoenix@fakeaddress.uk.com>
Date: Tue, 23 Jul 2002 12:19:32 GMT

In article <gq1qjuce3a4gnm9apr7h4qi0uinotclb3d@4ax.com>,
Monarx@sgfgfsd.dog says...
>
> Most FTP clients work great in PORT mode, but most of my users use IE,
> and I was hoping to get the most out of IE's FTP capability, such as
> viewing text files without having to copy them first.
>
> I have tried forwarding TCP ports to the server machine, all the way
> from 0-65535, and even tried port triggering to open the same ports
> upon a port 20 outbound from my server application.
>
> From what I understand, a client in passive mode sends a request to
> tcp port 21 on the server, then the server sends back the actual port
> number to open the data connection, if this is correct then why doesnt
> it work when I forward all tcp ports to my servers IP?
>
> It seems like IE is a poor FTP client, but everyone has it, and not as
> many people are familiar enough with the dos based client to use that.
> also some of my users will be connecting from thier school, and are
> not allowed to install software.
>
> If anybody knows a solution to this please let me know.
> tnx
>
>
Hi

Here's a set of instructions http://linksysftp.dyndns.org/ that might
help you.

Regards

Bill

Relevant Pages

  • Re: [Full-disclosure] Extending JavaScript Portscanning to Include Banner Grabbing
    ... A common implementation flaw in FTP clients allows FTP servers ... to cause clients to connect to other hosts. ... "port banning" restrictions). ... I took a look at this technique this morning, ...
    (Full-Disclosure)
  • Re: Is it possible to access an FTP behind a Linksys befsr41 in passive mode?
    ... Last time I looked by default MS IE does FTP in ACTIVE mode. ... > Most FTP clients work great in PORT mode, but most of my users use IE, ... > upon a port 20 outbound from my server application. ...
    (comp.security.firewalls)
  • Re: Linksys Router and PASV FTP
    ... listen on this port for the data. ... firewalls, so that's exactly what PASV mode is for. ... and most FTP clients support it. ... I suppose an FTP client could use UPNP to set up the router to open the ...
    (comp.security.firewalls)
  • Re: FTP works from a command Window, but not from GUI
    ... As I knew, port number over 5000 need to add the key value into the registry.Also, FTP client transfer mode table is provided to you. ... The following table lists the FTP clients provided by Microsoft, and the connection mode that each client supports: ... > to do with Port Forwarding on my router since it did not work locally on the ...
    (microsoft.public.inetserver.iis.ftp)
  • Re: Is it possible to access an FTP behind a Linksys befsr41 in passive mode?
    ... Hope you are not using firmware 1.42.7 as it has problem with port ... > Most FTP clients work great in PORT mode, but most of my users use IE, ... > upon a port 20 outbound from my server application. ...
    (comp.security.firewalls)
Quantcast