Re: Smoothwall 0.9.9 and Zyxel 642R ADSL PortForwad?
From: Bob Fryer (efryer@onaustralia.com.au)Date: 05/30/02
- Next message: Amanda B. Rekinwith: "Re: Possible to hide IP address?"
- Previous message: lolofe: "Re: FW-1 gateway sends ICMP packets"
- In reply to: Da Guul: "Re: Smoothwall 0.9.9 and Zyxel 642R ADSL PortForwad?"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
From: "Bob Fryer" <efryer@onaustralia.com.au> Date: Thu, 30 May 2002 13:38:09 GMT
Da Guul,
Ok, broadly speaking, you have no issues with your Web Server, the fact that
you can browse from the Green, gives me confidence that your Orange is setup
correctly including gateway settings.
You mentioned that you can browse the web as normal from Green as well.
This now leaves the Router and firewall setup.
On the firewall, (just running through it for completeness), you should have
port-forwarding set to go to the web server and you should also have the
port open on the firewall, through the setting in External services.
The router should have port 80 forwarded to the Firewall which you said that
it is.
A couple of questions, you said that your ISP allows servers to be attached,
but is it possible that they are blocking port 80 (incoming)?
Most of your fault finding should now centre around the router and firewall.
With the Alcatel router, there is a setting that passes all ports to the
firewall, letting the firewall be the actual screening hardware. It might be
worth trying this, we can always tighten it up after you have got the basics
working. This allows the router to work closer to the modem style of working
with no real blocking. You may want to read your manuals. I can have a look
in the Zyxel manuals as well, but probably not until this weekend.
Just another idea, do you want to privately email me your IP address or URL,
just for a sticky from this side (thats if you have the system online).
Regards
Bob
"Da Guul" <daguul@hotmail.com> wrote in message
news:897336d9.0205291031.36a2de37@posting.google.com...
> Bob
> > Can you see any improvement?? what have you tried next?
>
> well - for now i can use the browser (green) on 10.x.x.x (dmz)...
> >
> > To the best of my understanding of the Zyxel, you can change it to
bridging
> > mode, which will bring the ISP IP address to your red interface on the
> > Smoothwall. If you havent got this current setup working, it won't make
a
> > large difference and in fact you may find it harder as other issues come
> > into play with a changing address on the RED interface.
>
> so, if i got you right, this isn't the big diff! so, i will try that
> as the last alternative in testing
>
> >
> > With your current setup, you now need to start working through it bit by
> > bit. As the first stage, can you use your browser with the IP address of
the
> > Web Server, and see your web page?? If not, need to look at the setup of
> > your web server.
>
> that works - but from the outside it doesn't
>
> > Are you connecting currently to the Internet (from your workstation)
through
> > the smoothwall firewall, or is that an issues as well?
>
> workstation 2 internet? thats not the issue (for instance) because it
> works (fine)....
- Next message: Amanda B. Rekinwith: "Re: Possible to hide IP address?"
- Previous message: lolofe: "Re: FW-1 gateway sends ICMP packets"
- In reply to: Da Guul: "Re: Smoothwall 0.9.9 and Zyxel 642R ADSL PortForwad?"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
Relevant Pages
|
