Re: Performing NAT on a bridge

From: Jeff Umbach (jeff_at_govnors.com)
Date: 05/01/03

  • Next message: Nico Kadel-Garcia: "Re: Establishing a site-to-site ipsec connection" 
    Date: Wed, 30 Apr 2003 23:32:39 GMT

    True 

    -- 
Jeff Umbach
"Kyler Laird" <Kyler@news.Lairds.org> wrote in message
news:74q5o-m7i.ln1@news.lairds.org...
> "Jeff Umbach" <jeff@govnors.com> writes:
>
> >You cannot perform NAT on a bridge because it is a form of routing and a
> >bridge does not do any routing, it only joins two network segments in a
> >transparent fashion.
>
> The definition is getting fuzzy these days.
> http://ebtables.sourceforge.net/br_fw_ia/br_fw_ia.html
>
> --kyler
  • Next message: Nico Kadel-Garcia: "Re: Establishing a site-to-site ipsec connection"

    Relevant Pages

    • Re: Performing NAT on a bridge
      ... >>You cannot perform NAT on a bridge because it is a form of routing ... I am using a bridging firewall, ...
      (comp.os.linux.security)
    • Re: Performing NAT on a bridge
      ... You cannot perform NAT on a bridge because it is a form of routing and a ... > performing NAT on the bridge? ... > following iptables rules:- ...
      (comp.os.linux.security)
    • Re: router help needed ....urgent
      ... now what i need is that all my traffic for internet ... >> routing or PBR on cisco, ... > a summary of the entire pool to both providers for failover purposes. ... Why not just put the 2 internet feeds into a hub/switch and connect the router by 1 ethernet port and use IP routing and NAT to determine the best route to use. ...
      (comp.dcom.sys.cisco)
    • IPR2 + Netfilter: stateful _routing_ on inbound DNAT, in dual-homed setup?
      ... I'm preparing to upgrade our firewall. ... achieve the same with a single box, steered by two routing tables. ... understanding that Netfilter NAT doesn't mix well with IPR2 NAT, ... I know that Netfilter can do seamless stateful filtering of traffic ...
      (comp.os.linux.networking)
    • Re: Joining subnets
      ... Find a real news server. ... Kernel IP routing table ... By using nat, I do not have to worry about routing ... to the lan network from the servers. ...
      (comp.os.linux.networking)
    • Quantcast