Re: usr sportster won't answer call

From: Laplace (Laplace@tranforms.org)
Date: 02/10/03 

From: "Laplace" <Laplace@tranforms.org>
Date: Mon, 10 Feb 2003 08:09:51 +0800

Bill Unruh <unruh@string.physics.ubc.ca> wrote in message
news:b23mdc$ssg$1@nntp.itservices.ubc.ca...
> "Laplace" <Laplace@tranforms.org> writes:
>
> ]usr sportster won't answer call
> ]at root account
> ]minicom
>
> ]I entered ats0=1 and at&w0
>
> ]then in window 98 se I dial in ok.
>
>
>
> ]but when it is reboot .
> ]at&w0 is not writing into the current profile.
>
> ]modem won't answer at all.
> ]do u know why?
>
> ]is there my "at&w0" wrong? it is not writing the "ats0=1" into the modem
> ]profile.
>
> You should never ever expect a modem to come up in the right state. If
> you want it to be in a certain state, then set it in that state.
> Send the modem the commands to put it into that state.
> AT&W0 does not alter the factory default afaik. You must send it a
> command, like ATZ to get it to read that memory. But you should never
> use ATZ since some random program could have altered the memory. Use the
> AT&F or of sportsters, AT&F1 to put it into the factory hardware flow
> control default and then send it whatever other commands you want it to
> have. Do this in a script you call from /etc/rc.d/rc.local if need be.
>

my rc.serial is the usual one and it was found in the redhat 7.3 system
files.

at the present moment I knew that I cannot dial and I was away from the
office.

Relevant Pages

  • Re: usr sportster wont answer call
    ... ]usr sportster won't answer call ... You should never ever expect a modem to come up in the right state. ... Send the modem the commands to put it into that state. ... use ATZ since some random program could have altered the memory. ...
    (comp.os.linux.security)
  • Re: minicom serial output
    ... >doesn't react and a multimeter accross the serial port shows that no data ... >initialisation / hangup commands. ... I already changed the modem initialisation string to ... present minicom configuration, go back to the default configuration ...
    (comp.os.linux.hardware)
  • Re: minicom serial output
    ... >>doesn't react and a multimeter accross the serial port shows that no data ... I already changed the modem initialisation string to ... >>'D' (one of the commands recognised by my device) and I can get my device ... > present minicom configuration, go back to the default configuration ...
    (comp.os.linux.hardware)
  • Re: recording voice through a independent TSP
    ... I have no experience in developing a wav driver. ... > so where will be my translations from TAPI commands to the PBX ... Unimodem can translate between TAPI and AT modem commands. ...
    (microsoft.public.win32.programmer.tapi)
  • Re: minicom serial output
    ... doesn't react and a multimeter accross the serial port shows that no data ... It also reacts to the modem ... 'D' (one of the commands recognised by my device) and I can get my device ... If you are changing the settings each time, ...
    (comp.os.linux.hardware)