yes you can Hack it (My best post)



Original Post from DEFENDHACKERS BLOG

http://defendhackers.blogspot.com/2011/04/yes-you-can-hack-it-my-best-post.html



Peoples Out there Suggest me a Good Mobile Phone For me,,i hated using
Symbian ..! N81..For the last one weeek am surfing , reading reviews
about each phone , But don kno which one have to pick few say ANDROID
is Awsum, And few say Nokia N900 (Maemo Linux OS Incredible), And few
askk me to go BLACKBERRY (I hated coz, blackberry Doesnt come With Fun
Packed multimedia Stuffs) And about Iphone i dont needed it, I Always
been a Lazy And Sober Person..Don Want to miss Ma Phone..Ha ha ..So
Gottta Review Or Suggestion For me Regarding my Purchase..Send
message in FB or Leave Comment Or Mail me(that u can find on the
Homepage)
And Last thing , May be This month 20th i go for Buying..! So Y
Waiting Write ur Suggestion for me

1).
First Introduction
This Tutorial Will Teach you what it does, how it does, Hot to use
it , How to hack it and some other simple DOS commands that will be
useful to you in the future. THIS TUTORIAL IS FOR NEWBIEZ ONLY!!! If
you are NOT a newbie then don't go any farther reading this because if
you're smart enough you probably already know it all. So don't waste
yourt time reading something that you already know.

2).
NETBIOS also known as NBTSTAT
This is a program run on the Windows system and is used for
identifying a remote network or computer for file sharing enabled. We
can expoit systems using this method. It may be old but on home pc's
sometimes it still works great. You can use it on your friend at home
or something. I don't care what you do, but remember, that you are
reading this document because you want to learn. So I am going to
teach you. Ok. So, you ask, "How do i get to NBTSTAT?" Well, there are
two ways, but one's faster.
Method 1:Start>Programs>MSDOS PROMPT>Type NBTSTAT
Method 2:Start>Run>Type Command>Type NBTSTAT
Ok! Now since you're in the DOS command under NBTSTAT, you're probably
wondering what all that crap is that's on your screen. These are the
commands you may use. I'm only going to give you what you need to know
since you are striving to be l33t. Your screen should look like the
following:

NBTSTAT [ [-a RemoteName] [-A IP address] [-c] [-n]
[-r] [-R] [-RR] [-s] [-S] [interval] ]
-a (adapter status) Lists the remote machine's name table given its
name
-A (Adapter status) Lists the remote machine's name table given its IP
address.
-c (cache) Lists NBT's cache of remote [machine] names and their IP
addresses
-n (names) Lists local NetBIOS names.
-r (resolved) Lists names resolved by broadcast and via WINS
-R (Reload) Purges and reloads the remote cache name table
-S (Sessions) Lists sessions table with the destination IP addresses
-s (sessions) Lists sessions table converting destination IP addresses
to computer NETBIOS names.
-RR (ReleaseRefresh) Sends Name Release packets to WINS and then,
starts Refresh
RemoteName Remote host machine name.

IP address Dotted decimal representation of the IP address.
interval Redisplays selected statistics, pausing interval seconds
between each display.
Press Ctrl+C to stop redisplaying statistics.

C:\WINDOWS\DESKTOP>

The only two commands that are going to be used and here they are:
-a (adapter status) Lists the remote machine's name table given its
name
-A (Adapter status) Lists the remote machine's name table given its IP
address.
Host Names

3).
NOW

The -a means that you will type in the HOST NAME of the person's
computer that you are trying to access. Just in case you don't have
any idea what a Host Name looks like here's an example.
123-fgh-ppp.internet.com
there are many variations of these adresses. For each different
address you see there is a new ISP assigned to that computer. look at
the difference.
abc-123.internet.com
ghj-789.newnet.com
these are differnet host names as you can see, and, by identifying the
last couple words you will be able to tell that these are two
computers on two different ISPs. Now, here are two host names on the
same ISP but a different located server.
123-fgh-ppp.internet.com
567-cde-ppp.internet.com
IP Addresses


4).You can resolce these host names if you want to the IP address
(Internet Protocol)
IP addresses range in different numbers. An IP looks like this:
201.123.101.123
Most times you can tell if a computer is running on a cable connection
because of the IP address's numbers. On faster connections, usually
the first two numbers are low. here's a cable connection IP.
24.18.18.10
on dialup connections IP's are higher, like this:
208.148.255.255
notice the 208 is higher than the 24 which is the cable connection.
REMEMBER THOUGH, NOT ALL IP ADDRESSES WILL BE LIKE THIS.
Some companies make IP addresses like this to fool the hacker into
believing it's a dialup, as a hacker would expect something big, like
a T3 or an OC-18. Anyway This gives you an idea on IP addresses which
you will be using on the nbtstat command.
Getting The IP Through DC (Direct Connection)


5. First. You're going to need to find his IP or host name. Either
will work. If you are on mIRC You can get it by typing /whois
(nick) ...where (nick) is the persons nickname without parenthesis.
you will either get a host name or an IP. copy it down. If you do not
get it or you are not using mIRC then you must direct connect to their
computer or you may use a sniffer to figure out his IP or host name.
It's actually better to do it without the sniffer because most
sniffers do not work now-a-days. So you want to establish a direct
connection to their computer. OK, what is a direct connection? When
you are:
Sending a file to their computer you are directly connected.
AOL INSTANT MESSENGER allows a Direct Connection to the user if
accepted.
ICQ when sending a file or a chat request acception allows a direct
connection.
Any time you are sending a file. You are directly connected. (Assuming
you know the user is not using a proxy server.)
Voice Chatting on Yahoo establishes a direct connection.
If you have none of these programs, either i suggest you get one, get
a sniffer, or read this next statement.
If you have any way of sending thema to your site that enables site
traffic statistics, and you can log in, send a to your site, then
check the stats and get the IP of the last visitor. It's a simple and
easy method i use. It even fool some smarter hackers, because it
catches them off guard. Anyway, once you are directly
connected use either of the two methods i showed you earlier and get
into DOS. Type NETSTAT -n. NETSTAT is a program that's name is short
for NET STATISTICS. It will show you all computers connected to yours.
(This is also helpful if you think you are being hacked by a trojan
horse and is on a port that you know such as Sub Seven: 27374.) Your
screen should look like this showing the connections to your computer:

--------------------------------------------------------------------------------------------

C:\WINDOWS\DESKTOP>netstat -n
Active Connections
Proto Local Address Foreign Address State
TCP 172.255.255.82:1027 2xx.1xx.x8.x6:13784 ESTABLISHED
TCP 172.255.255.82:1036 2xx.1xx.4x.3:5190 ESTABLISHED
TCP 172.255.255.82:1621 2x.1x1.3x.x5:66 CLOSE_WAIT
TCP 172.255.255.82:1413 2xx.1xx.8.7:26778 ESTABLISHED
TCP 172.255.255.82:1483 6x.4.13.2xx:1863 ESTABLISHED {Where x=integer
from 0-9}
C:\WINDOWS\DESKTOP>

-------------------------------------------------------------------------------------------
The first line indicated the Protocol (language) that is being used by
the two computers.
TCP (Transfer Control Protocol) is being used in this and is most
widely used.
Local address shows your IP address, or the IP address of the system
you on.
Foreign address shows the address of the computer connected to yours.
State tells you what kind of connection is being made ESTABLISHED -
means it will stay connected to you as long as you are on the program
or as long as the computer is allowing or is needing the other
computers connection to it. CLOSE_WAIT means the connection closes at
times and waits until it is needed or you resume connection to be made
again. One that isn't on the list is TIME_WAIT which means it is
timed. Most Ads that run on AOL are using TIME_WAIT states.
the way you know the person is directly connected to your computer is
because of this:

----------------------------------------------------------------------------------------
C:\WINDOWS\DESKTOP>netstat -n
Active Connections
Proto Local Address Foreign Address State
TCP 172.255.255.82:1027 2xx.1xx.x8.4x:13784 ESTABLISHED
TCP 172.255.255.82:1036 2xx.1xx.4x.3:5190 ESTABLISHED
TCP 172.255.255.82:1621 2x.1x1.3x.75:66 CLOSE_WAIT
TCP 172.255.255.82:1413 abc-123-ppp.webnet.com ESTABLISHED
TCP 172.255.255.82:1483 6x.4.x3.2x9:1863 ESTABLISHED
C:\WINDOWS\DESKTOP> {Where x=integer from 0-9}

----------------------------------------------------------------------------------------

Notice the host name is included in the fourth line instead of the IP
address on all. This is almost ALWAYS, the other computer that is
connected to you. So here, now, you have the host name:
abc-123-ppp.webnet.com
If the host name is not listed and the IP is then it NO PROBLEM
because either one works exactly the same. I am using abc-123-
ppp.webnet.com host name as an example. Ok so now you have the IP and/
or host name of the remote system you want to connect to. Time to
hack!
Open up your DOS command. Open up NBTSTAT by typing NBTSTAT. Ok,
there's the crap again. Well, now time to try out what you have
leanred from this document by testing it on the IP and/or host name of
the remote system. Here's the only thing you'll need to know.
IMPORTANT, READ NOW!!!
-a (adapter status) Lists the remote machine's name table given its
name
-A (Adapter status) Lists the remote machine's name table given its IP
address.
Remember this?
Time to use it.
-a will be the host name
-A will be the IP
How do i know this?

Read the Statements following the -a -A commands. It tells you there
what each command takes.
So have you found which one you have to use?
GOOD!
Time to start.
Using it to your advantage


6. Type this if you have the host name only.
NBTSTAT -a (In here put in hostname without parenthesis)
Type this is you have the IP address only.
NBTSTAT -A (In here put in IP address without parenthesis)
Now, hit enter and wait. Now Either one of two things came up
1. Host not found
2. Something that looks like this:

------NetBIOS Local Name Table---------
------Name Type Status-----------------

GMVPS01 <00> UNIQUE Registered
WORKGROUP <00> GROUP Registered
GMVPS01 <03> UNIQUE Registered
GMVPS01 <20> UNIQUE Registered
WORKGROUP <1E> GROUP Registered


If the computer responded "Host not found" Then either one of two
things are the case:
1. You screwed up the host name.
2. The host is not hackable.
If number one is the case you're in great luck. If two, This system
isn't hackable using the NBTSTAT command. So try another system.
If you got the table as above to come up, look at it carefully as i
describe to you each part and its purpose.
Name - states the share name of that certain part of the computer
<00>, <03>, <20>, <1E> - Are the Hexidecimal codes giving you the
services available on that share name.
Type - Is self-explanatory. It's either turned on, or activated by
you, or always on.
Status - Simply states that the share name is working and is
activated.
Look above and look for the following line:
GMVPS01 <20> UNIQUE Registered
See it?
GOOD! Now this is important so listen up. The Hexidecimanl code of
<20> means that file sharing is enabled on the share name that is on
that line with the hex number. So that means GMVPS01 has file sharing
enabled. So now you want to hack this. Here's How to do it. (This is
the hard part)
LMHOST File


7. There is a file in all Windows systems called LMHOST.sam. We need
to simply add the IP into the LMHOST file because LMHOST basically
acts as a network, automatically logging you on to it. So go to Start,
Find, FIles or Folders. Type in LMHOST and hit enter. when it comes up
open it using a text program such as wordpad, but make sure you do not
leave the checkmark to "always open files with this extension" on
that. Simply go through the LMHOST file until you see the part:
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP
lmhosts
# files and offers the following extensions:
# <-Kro-Kite didn't missed point I just left blank w/o purpose
# #PRE
# #DOM:
# #INCLUDE
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
# <-Kro-Kite didn't missed point I just left blank w/o purpose
# Following any entry in the file with the characters "#PRE" will
cause
# the entry to be preloaded into the name cache. By default, entries
are
# not preloaded, but are parsed only after dynamic name resolution
fails.
# <-Kro-Kite didn't missed point I just left blank w/o purpose
# Following an entry with the "#DOM:" tag will associate the
# entry with the domain specified by . This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also
add a
# #PRE to the line. The is always preloaded although it will not
# be shown when the name cache is viewed.
# <-Kro-Kite didn't missed point I just left blank it's my wish
# Specifying "#INCLUDE " will force the RFC NetBIOS (NBT)
# software to seek the specified and parse it as if it were
# local. is generally a UNC-based name, allowing a
<-Kro-Kite didn't missed point I just left blank it's my wish
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of
the
# server prior to the #INCLUDE. This mapping must use the #PRE
directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client
machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmans erver\parameters
\nullsessionshares
# in the registry. Simply add "public" to the list found there.
# <-Kro-Kite didn't missed point I just left blank it's my wish
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
# <-Kro-Kite didn't missed point I just left blank it's my wish
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.

Read this over and over until you understand the way you want your
connection to be set. Here's an example of how to add an IP the way I
would do it:
#PRE #DOM:255.102.255.102 #INCLUDE
Pre will preload the connection as soon as you log on to the net. DOM
is the domain or IP address of the host you are connecting to. INCLUDE
will automaticall set you to that file path. In this case as soon as I
log on to the net I will get access to 255.102.255.102 on the C:/
drive. The only problem with this is that by doin the NETSTAT command
while you are connected, and get the IP of your machine. That's why it
only works on simple PC machines. Because people in these days are
computer illiterate and have no idea of what these commands can do.
They have no idea what NETSTAT is, so you can use that to your
advantage. Most PC systems are kind of hard to hack using this method
now because they are more secure and can tell when another system is
trying to gain access. Also, besure that you (somehow) know whether
they are running a firewall or not because it will block the
connection to their computer. Most home systems aren't running a
firewall, and to make it better, they don't know how operate the
firewall, therefore, leaving the hole in the system. To help you out
some, it would be a great idea to pick up on some programming
languages to show you how the computer reads information and learn
some things on TCP/IP (Transfer Control Protocol/Internet Protocol) If
you want to find out whether they are running a firewall, simply hop
on a Proxy and do a port scan on their IP. You will notice if they are
running a firewall because most ports are . Either way, you still have
a better chance of hacking a home system than hacking Microsoft.
Gaining Access


7. Once you have added this to you LMHOST file. You are basically
done. All you need to do is go to:
Start
Find
Computer
Once you get there you simply type the IP address or the host name of
the system. When it comes up, simply double click it, and boom!
There's a GUI for you so you don't have to use DOS anymore. You can
use DOS to do it, but it's more simple and fun this way, so that's the
only way i put it. When you open the system you can edit, delete,
rename, do anything to any file you wish. I would also delete the
command file in C:/ because they may use it if they think someone is
in their computer. Or simply delete the shortcut to it. Then here's
when the programming comes in handy. Instead of using the NBTSTAT
method all the time, you can then program you own trojan on your OWN
port number and upload it to the system. Then you will have easier
access and you will also have a better GUI, with more features. DO NOT
allow more than one connection to the system unless they are on a
faster connection. If you are downloading something from their
computer and they don't know it and their connection is being slow,
they may check their NETSTAT to see what is connected, which will show
your IP and make them suspicious. Thats it. All there is to it. Now go
out and scan a network or something and find a computer with port 21
or something open .

Hoomp ! Posting Such Tutorial is just time taking, Anyways Thats Just
Fine..
.



Relevant Pages

  • understanding chkrootkit: sshd section
    ... Rhosts Authentication disabled, originating port will not be trusted. ... Secure connection to %.100s on port %hu refused%.100s. ... Warning: Remote host refused compression. ... Received RSA challenge from server. ...
    (comp.os.linux.security)
  • understanding chkrootkit: sshd section
    ... Rhosts Authentication disabled, originating port will not be trusted. ... Secure connection to %.100s on port %hu refused%.100s. ... Warning: Remote host refused compression. ... Received RSA challenge from server. ...
    (comp.security.unix)
  • Yes You can Hack It (My Best post)
    ... identifying a remote network or computer for file sharing enabled. ... -A Lists the remote machine's name table given its IP ... RemoteName Remote host machine name. ... Most times you can tell if a computer is running on a cable connection ...
    (alt.2600)
  • Yes you can hack it (Best Post)
    ... identifying a remote network or computer for file sharing enabled. ... -A Lists the remote machine's name table given its IP ... RemoteName Remote host machine name. ... Most times you can tell if a computer is running on a cable connection ...
    (comp.os.linux.setup)
  • Yes you can hack it (My Best post)
    ... identifying a remote network or computer for file sharing enabled. ... -A Lists the remote machine's name table given its IP ... RemoteName Remote host machine name. ... Most times you can tell if a computer is running on a cable connection ...
    (comp.security.firewalls)