From: \(-_-\) (
Date: 05/19/04

Date: Wed, 19 May 2004 06:53:22 GMT

Trying to route remote desktop on a windows server 2003 SBS through a
sonicwall tele3 sp, one port, and through a linksys. The sonicwall is on
the 'outside' edge of this little network, it goes to the linksys, which has
the server and one client. The config presently is that the linksys has a
DMZ on the server IP, and remote port 3389 forwarded to the server IP, and
on the sonicwall I created a new pass through for rdc of tcp and udp ports
3389, but the remote desktop is still not reachable from the outside. I can
remote into the server from the workstation within the network, so the
server settings are ok, but could be the linksys or the sonicwall. Online
documentation on the sonicwall seems limited. Any input I thank you for in

Relevant Pages

  • Re: RemoteDesktopSonicwall
    ... > sonicwall tele3 sp, one port, and through a linksys. ... > the server and one client. ...
  • Re: Help! E-mail down
    ... As much as I *recommend* kicking the linksys to the curb, it seems obvious to this eye that the sonicwall is the problem. ... I just called the DNS host to ensure I configured the DNS records properly, which they assured me I did, and then I checked on and verified that the mail records are pointing to our server as the host stated and they are. ... This is an automatically generated Delivery Status Notification ...
  • Need help creating a VPN through a firewall
    ... We've got an SBS2003 server. ... Can anyone tell me what I have to configure in order to get a VPN ... and I need to be able Remote Desktop into the server from home. ... installed our system have the router connecting to the Sonicwall. ...
  • Re: Remote Desktop Setup
    ... port forward 4125, 443, and 3389 on the linksys to the server. ... http://IP/remote and have them login. ... > I am somewhat new to SBS 2003 and remote desktop. ...
  • Re: Remote Printing with RWW Help Req.
    ... through remote desktop from a laptop located in a Windows 2003 LAN, ... Firstly please go to RWW page and Connect to Server or Client Desktops, ... The local printer's driver is not for Windows Server 2003, ...