RE: Protecting the enterprise wireless network
- From: "Sergio Castro" <sergio.castro@xxxxxxxxxx>
- Date: Fri, 16 May 2008 12:04:39 -0500
Hi Zeffy,
They way we set a similar wifi network is using 2Wire wifi access points
connected to a Foundry switch, using a VLAN. Access to the Internet is
controlled through a Juniper firewall. The switch is configured in such a
way that each port connected to an access point knows the mac address of the
access point, and will not transmit packets if it detects a different mac
address. Thus, if someone hooks up a laptop to the access point's ethernet
connection, the switch will not transmit. (Of course a dedicated hacker
inside your building could spoof the mac address).
With pretty much any decent firewall you can control the protocols you want
to permit AND add business rules such as limiting by time of day, by user,
by access point, etc.
As to load balancing, unless you have a 14.4K modem I wouldn't worry about
it :)
You probably have several Mbs in Internet access, and your users will only
use a fraction of it. Don't spend your budget on traffic shapers unless
you're an ISP providing services to corporate customers.
As to wifi security, I strongly recommend using WPA; WEP can be cracked in
minutes. As an extra layer of security you may want to limit the power of
the access points to cover only the office or meeting room, so packets won't
leak outside your physical perimeter. And remember, don't put your company's
name in the SSID! :)
As to limiting an attacker, bear in mind that if a laptop is compromised,
the hacker will have the same privileges as the user. But maybe I don't
understand your last question? Care to elaborate?
Regards,
Sergio
-----Mensaje original-----
De: listbounce@xxxxxxxxxxxxxxxxx [mailto:listbounce@xxxxxxxxxxxxxxxxx] En
nombre de zefferno@xxxxxxxxx
Enviado el: Viernes, 16 de Mayo de 2008 12:51 a.m.
Para: security-basics@xxxxxxxxxxxxxxxxx
Asunto: Protecting the enterprise wireless network
Hey all.
We want to implement a separated secure Internet Wireless network which will
be used by guests or users from our company in our building.
We will use Access Points, managed switch and Gateway device that you might
offer. The Gateway can be also a Linux (open-source) based solution - it is
much better for us :)
We are looking for the following features:
1. Only HTTP, HTTPS, SMTP will be permitted, and it will be great if it is
also analyzes the protocol, not just blocking a port.
2. QOS - Some kind of traffic shaping to balance the Internet between all
users.
3. We want to limit the access from specific time range.
4. Since there is a chance that a User from our company will accidentally
connect the LAN cable without disconnecting the Wireless network. Is there
any way to block all access between all connected Wireless users? So that an
attacker won't be able to access any of the Wireless clients?
Best Regards,
Zeffy.
__________ NOD32 3104 (20080516) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
- References:
- Protecting the enterprise wireless network
- From: zefferno
- Protecting the enterprise wireless network
- Prev by Date: RE: Skype readies for Enterprise?
- Next by Date: Basic Computer Security Advice Needed
- Previous by thread: Protecting the enterprise wireless network
- Next by thread: Re: Protecting the enterprise wireless network
- Index(es):
Relevant Pages
|
|
