Lots of incoming traffic on UDP 1026 and UDP 1027?

From: FocusHacks (focushacks_at_gmail.com)
Date: 12/27/04

  • Next message: Michael Puchol: "Re: Wireless security question" 
    Date: Mon, 27 Dec 2004 12:34:41 -0600
To: security-basics@securityfocus.com

    I searched the archives at SecurityFocus and couldn't come up with
    anything useful other than someone with Zone Alarm obviously saw the
    same activity and people were trying to tell him to look for listening
    ports on his machine, which is not the case.

    I'm getting literally hammered by tons of various IP's on UDP 1026 and UDP 1027

    I've attached a CSV log, modified a bit, from my NetScreen 5. I only
    showed the last 15 bytes of the Source IP:Port so the first octet,
    give or take a few bytes, is cut off. I left a few columns out as
    well.

    Let me know, this has been going on for quite a while, and all my
    searches are ending in vain. Any ideas? 

    -- 
http://www.FocusHacks.com - The Ford Focus Modification Site!

  • Next message: Michael Puchol: "Re: Wireless security question"

    Relevant Pages