RE: deny access

From: dave kleiman (dave_at_isecureu.com)
Date: 11/26/04

  • Next message: Germano, Tomas: "RE: "Secure" Web Hosting?"
    To: "'Carlos Garcia'" <carlosg@cabonet.net.mx>, <security-basics@securityfocus.com>
    Date: Thu, 25 Nov 2004 22:53:02 -0500
    
    

    Carlos,

    See:
    http://www.securityfocus.com/infocus/1734
    http://www.cymru.com/Documents/secure-ios-template.html
    http://www.cisco.com/en/US/products/sw/secursw/ps1018/products_tech_note0918
    6a00800a5b9a.shtml

    This should give you a good start to ACL's on the router.

    If you tell us what type of mail sever you have we can probably tell you how
    to setup deny lists for access and relaying.

    ______________________________________
    Dave Kleiman, CISSP, CISM, CIFI, MCSE
    www.SecurityBreachResponse.com

    -----Original Message-----
    From: Carlos Garcia [mailto:carlosg@cabonet.net.mx]
    Sent: Wednesday, November 24, 2004 18:28
    To: security-basics@securityfocus.com
    Subject: deny access

    newbie question how can i block this ip 216.212.33.185 i have a cisco 7200
    this ip is trying to send mail with my server, i did not configure the
    router so i dont know how to do this any help?

    Atte.
    Carlos A. Garcia G.
    Cabonet Staff
    Tel (624) 14 30120


  • Next message: Germano, Tomas: "RE: "Secure" Web Hosting?"

    Relevant Pages

    • Nat Router config
      ... going to a Belkin Nat router and then to a Cable Modem. ... When I log-in to the Router config web page from a firewall client ... some screens sometimes do not login properly, i.e. deny access. ...
      (microsoft.public.isa.configuration)
    • Nat Router
      ... going to a Belkin Nat router and then to a Cable Modem. ... When I log-in to the Router config web page from a firewall client ... some screens sometimes do not login properly, i.e. deny access. ...
      (microsoft.public.windows.server.networking)
    • NAT Router
      ... going to a Belkin Nat router and then to a Cable Modem. ... When I log-in to the Router config web page from a firewall client ... some screens sometimes do not login properly, i.e. deny access. ...
      (microsoft.public.windows.server.sbs)
    • Re: how to block access for outer LANs?
      ... > internet through one router; there are also switch between our LANs and ... Use a firewall and deny access to the IP addresses of ... If these computers have a Static IP then use the IP ...
      (microsoft.public.windowsxp.general)