RE: explain me this trace ?

From: Patrick Harper (llists@internetsecurityguru.com)
Date: 08/02/02 

From: "Patrick Harper" <llists@internetsecurityguru.com>
To: "'Srecko Jovancevic'" <xxx-x@amadeus.uni-bk.ac.yu>, <security-basics@securityfocus.com>
Date: Fri, 2 Aug 2002 09:25:38 -0700

I would say that you have a bad route somewhere (like in a router) and
it is bouncing back and fourth.

I have seen this with many upstream providers, (as well as others)

Patrick S. Harper - MCSE ISS
http://www.internetsecurityguru.com/resume.zip
 

-----Original Message-----
From: Srecko Jovancevic [mailto:xxx-x@amadeus.uni-bk.ac.yu]
Sent: Thursday, August 01, 2002 6:02 AM
To: security-basics@securityfocus.com
Subject: explain me this trace ?

16 532 ms 562 ms 547 ms 194.126.27.181
17 578 ms 547 ms 594 ms 194.126.27.182
18 688 ms 625 ms 609 ms 194.126.27.181
19 563 ms 578 ms 672 ms 194.126.27.182
20 547 ms 562 ms 563 ms 194.126.27.181
21 610 ms 562 ms 625 ms 194.126.27.182
22 594 ms 593 ms 610 ms 194.126.27.181
23 546 ms 563 ms 625 ms 194.126.27.182
24 625 ms 562 ms 625 ms 194.126.27.181
25 578 ms 594 ms 578 ms 194.126.27.182

Relevant Pages

  • Re: Second ISP
    ... make sure that the second ISP router does not have a better default ... All of this can be done with show ip route ... Does this require a routing ... but I would recommend a routing protocol. ...
    (comp.dcom.sys.cisco)
  • Re: T43 Networking fix question.
    ... Try a static route to the router. ... I can PING the ZyXel router on 192.168.1.1 just fine that way. ... But then, no matter what combination of HOST or NET route addressing I create in the fixed address tables in the TCP/IP configuration panels, I can never ping anything other than the 192.168.1.1 private address side of the ZyXel router. ... When you go to look at the documents in the supplied Broadcom driver package, in their 'PROTOCOL.INI' sample, they provide for additional 'fields' at the bottom of it in the driver section. ...
    (comp.os.os2.misc)
  • Re: Routing through two DD-WRTs
    ... a lousy term for blocking any wireless to wireless traffic. ... I can happily route packets from hosts on .111 to .110 and .112, ... IP table are for firewall rules, not for routing. ... gateway (IP address of remote router). ...
    (alt.internet.wireless)
  • Re: Routing for Verizon FIOS -- Reward for answer
    ... The problem we have is this:  Verizon's gateway is 70.x.x.1. ... address for our router ...  What do we use as an address for the outside interface ... route outbound through the gateway. ...
    (comp.dcom.sys.cisco)
  • Re: Problem with IP Masquerade + routed internal network (pretty newbie question)
    ... The network looks like this: ... > other way to define routes other than typing route add... ... If you have a proper router set up, each box on each subnet should only ... would route everything to our factory WAN over frame relay. ...
    (comp.os.linux.networking)