RE: IPS Comparison

From: Miguel Dilaj (MDilaj_at_nccglobal.com)
Date: 07/27/05

  • Next message: mox11_at_charter.net: "Re: Re: Identification of non Cisco AP's" 
    Date: Wed, 27 Jul 2005 21:20:28 +0100
To: pen-test@securityfocus.com

    And if you want the "El Cheapo" solutions, DYI:

    http://www.snort.org/docs/tap/

    Cheers,

    Miguel

    -----Original Message-----
    From: "JP Garcia" <jgarcia@networkadvocates.com>
    To: <pen-test@securityfocus.com>
    Date: Wed, 27 Jul 2005 09:19:10 -0400
    Subject: RE: IPS Comparison

    > If you're worried about being invisible with it, you really need to
    > take
    > a look at the NetOptics taps (http://www.netoptics.com/). We use one
    > and it's seamless; 100% totally invisible from the network because it's
    > not actually physically connected to the network. The signal is
    > magnetically induced onto another set of wires. It's slick.
    >
    > -JP Garcia

    ***********************************************************************************************************
    DISCLAIMER:
    This e-mail contains proprietary information, some or all of which may be legally privileged.
    It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail,
    please notify the author by replying to this e-mail. If you are not the intended recipient you may not use,
    disclose, distribute, copy, print or rely on this e-mail.
    ***********************************************************************************************************

  • Next message: mox11_at_charter.net: "Re: Re: Identification of non Cisco AP's"

    Relevant Pages

    • Re: Can I limit the bandwidth of a network interface with WIN32 API?
      ... a protocol driver gets a copy of the incoming and outgoing packets. ... By delaying or dropping those packets, it cannot delay the network traffic. ... not the intended recipient please notify the author by replying to this ...
      (microsoft.public.win32.programmer.networks)
    • Re: Restricting View of E-Mail Groups
      ... will only see the SMTP address of the DL. ... other users in the BCC field. ... intended recipient. ... network from viewing the e-mail addresses of other e-mail members in a given ...
      (microsoft.public.exchange2000.admin)
    • "Another" Newbie IDS Question
      ... Subject: "Another" Newbie IDS Question ... I run a "mostly NT network with the usual mix of workstations (NT, ... The information contained in this e-mail message is confidential, ... If the reader of this e-mail is not the intended recipient, ...
      (Focus-IDS)
    • RE: [fw-wiz] Interlopers on the WLAN
      ... insecure mechanisms, like WEP, to stop access to the network? ... > various other cybercrime laws. ... are not the intended recipient, you are hereby notified that any use, ... If you have received this communication in error, ...
      (Firewall-Wizards)
    • Re: Red Hat Enterprise Linux server fails to boot when connected to the network
      ... On 2/16/07, David Poole wrote: ... Enterprise Linux Version 4 server on it. ... However when it is connected to our network it freezes when booting up. ... intended recipient, please notify the sender immediately by e-mail or by ...
      (RedHat)