RE: Location Aware GPO question

From: Drew Simonis (simonis_at_myself.com)
Date: 04/18/04

  • Next message: Jannie Hanekom: "RE: Location Aware GPO question" 
    To: "Jannie Hanekom" <j_hanekom@hotmail.com>, focus-ms@securityfocus.com
Date: Sun, 18 Apr 2004 14:34:50 -0500

    Jannie,
    Thanks for your response.

    >>
    The major difference between this solution and the ICS one
    you refer to, is that the client must be able to connect to
    a DC for changes to take effect, which the ICS function seems
    to be specifically designed to NOT require (for understandable
    reasons.)
    <<

    This is really the crux of my question. I know about the use
    of sites and such. I want to emulate the behaviour you mention
    above, i.e. not having to refresh policy in order to allow the
    change.

    -ds

    ---------------------------------------------------------------------------
    ---------------------------------------------------------------------------

  • Next message: Jannie Hanekom: "RE: Location Aware GPO question"

    Relevant Pages

    • RE: ICS clients cannot connect
      ... I've got this from the ICS host: ... I turned off ICS host and then enabled it. ... the client and entered "ipconfig /release". ... goto one of the client machines and do the same, ...
      (microsoft.public.windowsxp.general)
    • Re: ICS on small home network no longer works for http traffic
      ... 1) If you're using MS ICS or Windows ... After installed a new router or cable modem replacing dial-up to access ... the Internet, you can't access some web sites. ... The client PC can ping to a outside IP, or a name and DNS> resolves the name ok. ...
      (microsoft.public.windowsxp.network_web)
    • Re: ICS setup problem
      ... may be idiosyncratic when the ICS is being implemented rather than ... Alarm though shows nothing getting through from the Internet. ... >>that contains the name of the dial up client and path to the server! ... >>connection on the server through the dial up gateway...incoming and ...
      (microsoft.public.windowsxp.network_web)
    • RE: ICS clients cannot connect
      ... Try going to a client machine and inputing the address manually ... Start / Controll Panel / Network ... DHCP should not be turned on on the master, just on the clients as ICS has a DHCP Server built into it. ...
      (microsoft.public.windowsxp.general)
    • Re: ICS works with static IP client but not DHCP client
      ... Buy the router. ... When ICS works it works ... I also have a laptop "client" machine that connects wirelessly to ... > the client machine I've configured the wireless adapter with an IP address ...
      (microsoft.public.windowsxp.network_web)