Re: Problem with my wireless network
From: Scott Morgan (scott_at_morganitechnology.com)
Date: Thu, 20 May 2004 12:38:27 -0600 To: Dragos Stanoi <Dragos@icnet.ro>
What is between the AP and the Wireless clients? There may be some noise
or obstruction. What is your config on the AP? Is it set to run at 10mb
one of the other setting, 5.5, 2, 1 mb.
Dragos Stanoi wrote:
> Hello .... all
> I have some problems as i said with my wireless netowrk. So , i use
> LinkSys eq.'s WAP 11 .
> Consider the structure:
> --------- -------- ----
> | SERVER1 | <-- dsl --> |SERVER2 |<----->| WAP|<----> WAP
> | (linux) | |(linux) | ---- clients
> --------- --------
> All the routes are ok ! The eq. communicate between them .... not so
> good ...
> (meaning at WAP - clients),i also use at wap->omnidirective antenas
> with California Amplifier 24dBi at clients ... at 1 km distantce
> between them they
> come with a band of 25-30 kB/s.(That's one of the problems)
> The main problem is with "ping" ... i can ping all clinets from
> server2 ... but none
> from server1, i can't explain this behaviour ... once again the
> route's are fine.
> All wap's have private ip's with public ip's at clients servers.
> This shouldn't count
> very much since the route's are there, on one hand .... on the other
> ... why the transmition
> rate is so small ... haw can i optimze the bandwith -- say arounf
> 100-120 kB/s ?!