TWSL2010-003: Unauthorized access to root NFS export on EMC Celerra NAS appliance
- From: Trustwave Advisories <trustwaveadvisories@xxxxxxxxxxxxx>
- Date: Mon, 2 Aug 2010 21:32:17 -0400
Trustwave's SpiderLabs Security Advisory TWSL2010-003:
Unauthorized access to root NFS export on EMC Celerra Network Attached
Storage (NAS) appliance
Published: 2010-07-29 Version: 1.0
Vendor: EMC (http://www.emc.com)
Product: Celerra Unified Storage products
Version(s) affected: All
The Celerra Unified Storage Platform provides Network Attached Storage (NAS)
services through a combination of server appliances and software modules.
Credit: Steve Ocepek of Trustwave's SpiderLabs
The Celerra appliance's NFS server freely exports its "/" file system and
enforces access using a factory-defined list of authorized IP addresses.
The addresses found on a recent model are listed in the showmount example
below, however this list may differ depending on product version. The IP
addresses are intended for communication internal to the appliance, but are
still accepted from external sources. An attacker can mount this file system
by spoofing an authorized IP address.
The NFS showmount command can be used to obtain a list of the IP addresses:
# showmount -e <Celerra IP address>
Export list for <Celerra IP address>:
Because the appliance's NFS server does not enable the "rootsquash" feature,
full access to the file system is possible by mounting the export using root
Fully spoofing the source IP address (for sending and receiving packets)
will usually require access to the local subnet or the ability to exploit
some other network infrastructure vulnerability. On Linux, local IP address
spoofing can be accomplished by creating an alias interface and using the
"ip route" command to set the source IP accordingly.
# ifconfig eth0:0 184.108.40.206
# ip route add <Celerra IP address> dev eth0 src 220.127.116.11
# mkdir nfs
# mount <Celerra IP address>:/ nfs
The flaw allows unauthorized access to files contained on the system,
including all CIFS shares and iSCSI mounted drives. The "/" path does not
correspond to the true root of the file system -- only the root of the user
data directory is exposed.
The vendor has acknowledged this issue and issued the following workaround.
Vendor has also published a knowledgebase article about the issue and
mitigation so support can help any customers who call in with this issue
until a permanent fix from EMC is available.
Vendor estimated date for a code fix is Q3 2010.
The following recommendations were provided by the vendor.
1. Hide NFS exports and show it only based on the configured access. Setting
forceFullShowmount param to 0 (default is 1) will hide the "/" from the list
since only Control Station have access to it for administration purpose:
[root@virgil slot_3]# server_param server_3 -f mount -info
name = forceFullShowmount
facility_name = mount
default_value = 1
current_value = 1
user_action = none
change_effective = immediate
range = (0,1)
description = Forces response to showmount requests to fully
[root@virgil slot_3]# server_param server_3 -f mount -modify \
forceFullShowmount -value 0
server_3 : done
After the above change, client will see only the shares he have permissions
to access to:
/usr/sbin/showmount -e 172.24.97.3
Export list for 172.24.97.3:
2. Change default IP addresses (during install or after) for internal
network along with first step above to further minimize the exploitability.
Product team has provided additional mitigations steps that can be
implemented by the customers to reduce the severity of exploitation of a
1. Create IP-based access rules on the network equipment rejecting traffic
for IP addresses belonging to internal Celerra network which do have own
switch for that purpose. These addresses are listed in the /etc/hosts file
of the Celerra Control Station.
2. Configure firewall(s) between Data Movers and NFS clients to reject
traffic for IP addresses belonging to the internal Celerra network.
3. Hide NFS exports and show it only based on the configured access. Setting
forceFullShowmount param to 0 (default is 1) will hide the ³/² from the list
since only Control Station have access to it for administration purpose.
4. Disable IP reflect
Vendor Communication Timeline:
05/07/10 - Initial communication
05/10/10 - Vulnerability details provided
05/18/10 - Vulnerability acknowledged, workaround and timeline provided
07/27/10 - Additional workaround details provided
1.0 Initial publication
Trustwave is the leading provider of on-demand and subscription-based
information security and payment card industry compliance management
solutions to businesses and government entities throughout the world.
For organizations faced with today's challenging data security and
compliance environment, Trustwave provides a unique approach with
comprehensive solutions that include its flagship TrustKeeper
compliance management software and other proprietary security solutions.
Trustwave has helped thousands of organizations--ranging from Fortune 500
businesses and large financial institutions to small and medium-sized
retailers--manage compliance and secure their network infrastructure, data
communications and critical information assets. Trustwave is headquartered
in Chicago with offices throughout North America, South America, Europe,
Africa, China and Australia. For more information, visit
About Trustwave's SpiderLabs:
SpiderLabs is the advance security team at Trustwave responsible for
incident response and forensics, ethical hacking and application security
tests for Trustwave's clients. SpiderLabs has responded to hundreds of
security incidents, performed thousands of ethical hacking exercises and
tested the security of hundreds of business applications for Fortune 500
organizations. For more information visit
The information provided in this advisory is provided "as is" without
warranty of any kind. Trustwave disclaims all warranties, either express or
implied, including the warranties of merchantability and fitness for a
particular purpose. In no event shall Trustwave or its suppliers be liable
for any damages whatsoever including direct, indirect, incidental,
consequential, loss of business profits or special damages, even if
Trustwave or its suppliers have been advised of the possibility of such
damages. Some states do not allow the exclusion or limitation of liability
for consequential or incidental damages so the foregoing limitation may not
- Prev by Date: [DCA-00014] Dlink WBR-2310 Wireless Router DoS
- Next by Date: [security bulletin] HPSBMA02563 SSRT100165 rev.1 - HP OpenView Network Node Manager (OV NNM), Remote Execution of Arbitrary Code
- Previous by thread: [DCA-00014] Dlink WBR-2310 Wireless Router DoS
- Next by thread: [security bulletin] HPSBMA02563 SSRT100165 rev.1 - HP OpenView Network Node Manager (OV NNM), Remote Execution of Arbitrary Code