Re: SSH 3.2.3 - Problem executing Make

From: Alf Nicolaysen (Alf.Nicolaysen@de.ibm.com)
Date: 03/21/03

  • Next message: Mark Leisher: "Re: cron'ing rsync over ssh"
    To: secureshell@securityfocus.com
    From: "Alf Nicolaysen" <Alf.Nicolaysen@de.ibm.com>
    Date: Fri, 21 Mar 2003 12:37:30 +0100
    
    

    Hi again,

    Even that I tested a few days before and i have to say: You wont be happy
    with that 5.1 Aix machine. The results you get from the compile are NOT
    user-specific, because I got some strange messages even as root, saying
    something like: file is there, but unusuable. I advise you to stick to the
    4.3.3 machines, where I compiled in the meantime 3 times successful. I used
    gcc 2.95.2 and OPENSSH 3.5p1 on AIX 4.3.3 ML 10.

    Alf Nicolaysen

    James <james00_c@yahoo.com> on 21.03.2003 03:33:51

    To: secureshell@securityfocus.com
    cc:
    Subject: Re: SSH 3.2.3 - Problem executing Make

    In-Reply-To: <3E7936F6.4070502@wvu.edu>

    Jason, thanks very much for compiling... I get identical errors with
    either make. The problem might be with libc.a. I have reported it to our
    system administrator so that they can look into it.

    I am now trying to compile ssh 3.2.3 under AIX 5.1 and this time the error
    message that I receive is as follows:

    $ /usr/ccs/bin/make
            cd . && CONFIG_FILES=
    CONFIG_HEADERS=sshconf.h /bin/sh ./config.status
    creating sshconf.h
    sshconf.h is unchanged
            make all-recursive
    Making all in lib
    Making all in sshutil
    Making all in sshcore
            gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I./.. -I\../../.. -g -
    O2 -Wall -Wno-unknown-pragmas -c sshdebug.c
    In file included from ../sshincludes.h:60,
                     from sshdebug.c:14:
    ../sshincludes_unix.h:19: sys/types.h: The file access permissions do not
    allow the specified action.
    ../sshincludes_unix.h:20: sys/stat.h: The file access permissions do not
    allow the specified action.
    ../sshincludes_unix.h:21: sys/param.h: The file access permissions do not
    allow the specified action.
    In file included from ../sshincludes.h:60,
                     from sshdebug.c:14:
    ../sshincludes_unix.h:53: #error "Autoconfig error, your compiler doesn't
    seem to support any 32 bit type"
    ../sshincludes_unix.h:94: sys/types.h: The file access permissions do not
    allow the specified action.
    In file included from ../sshincludes_unix.h:108,
                     from ../sshincludes.h:60,
                     from sshdebug.c:14:
    /usr/bin/../lib/gcc-lib/powerpc-ibm-aix5.1.0.0/2.9-aix43-
    010414/include/stdio.h:377: sys/types.h: The file access permissions do
    not allow the specified action.
    In file included from ../sshincludes_unix.h:108,
                     from ../sshincludes.h:60,
                     from sshdebug.c:14:
    /usr/bin/../lib/gcc-lib/powerpc-ibm-aix5.1.0.0/2.9-aix43-
    010414/include/stdio.h:444: sys/limits.h: The file access permissions do
    not allow the specified action.
    In file included from ../sshincludes_unix.h:109,
                     from ../sshincludes.h:60,
                     from sshdebug.c:14:
    /usr/include/ctype.h:110: sys/localedef.h: The file access permissions do
    not allow the specified action.
    In file included from ../sshincludes_unix.h:111,
                     from ../sshincludes.h:60,
                     from sshdebug.c:14:
    /usr/include/fcntl.h:13: sys/types.h: The file access permissions do not
    allow the specified action.
    /usr/include/fcntl.h:65: sys/flock.h: The file access permissions do not
    allow the specified action.
    In file included from /usr/include/fcntl.h:144,
                     from ../sshincludes_unix.h:111,
                     from ../sshincludes.h:60,
                     from sshdebug.c:14:
    /usr/include/unistd.h:50: sys/types.h: The file access permissions do not
    allow the specified action.
    /usr/include/unistd.h:54: sys/access.h: The file access permissions do not
    allow the specified action.
    /usr/include/unistd.h:569: sys/lockf.h: The file access permissions do not
    allow the specified action.
    In file included from ../sshincludes_unix.h:111,
                     from ../sshincludes.h:60,
                     from sshdebug.c:14:
    /usr/include/fcntl.h:148: sys/stat.h: The file access permissions do not
    allow the specified action.
    In file included from ../sshincludes_unix.h:113,
                     from ../sshincludes.h:60,
                     from sshdebug.c:14:
    /usr/include/signal.h:20: sys/signal.h: The file access permissions do not
    allow the specified action.
    In file included from ../sshincludes_unix.h:156,
                     from ../sshincludes.h:60,
                     from sshdebug.c:14:
    /usr/include/time.h:157: sys/types.h: The file access permissions do not
    allow the specified action.
    In file included from ../sshincludes.h:60,
                     from sshdebug.c:14:
    ../sshincludes_unix.h:160: sys/resource.h: The file access permissions do
    not allow the specified action.
    ../sshincludes_unix.h:168: sys/times.h: The file access permissions do not
    allow the specified action.
    In file included from ../sshincludes_unix.h:172,
                     from ../sshincludes.h:60,
                     from sshdebug.c:14:
    /usr/include/utime.h:26: sys/types.h: The file access permissions do not
    allow the specified action.
    make: 1254-004 The error code from the last command is 1.

    Does anyone know if this implies that I need to be a superuser? Since I
    cannot get superuser priviledges and am only interested in the ssh
    clients, is there a work-around?

    Thanks for any tips!

    James

    >-----BEGIN PGP SIGNED MESSAGE-----
    >Hash: SHA1
    >
    >James, I did a compile of 3.2.3 on an 7026-M80 tonight running AIX 4.3.3
    >ML 10... I used gcc 2.95.2.1 19991024 and the /usr/ccs/bin/make and it
    >compiled with out problems. So only thing I can thing of is something on
    >your machine.. my configure options were as follows:
    >
    >Configuration summary:
    >======================
    >
    >~ Host type................: powerpc-ibm-aix4.3.3.0
    >~ CC.......................: gcc
    >~ CPPFLAGS.................:
    >~ CFLAGS...................: -g -O2 -Wall -Wno-unknown-pragmas
    >- -D_LARGE_FILES
    >~ LDFLAGS..................:
    >~ LIBS.....................: -lm -lbsd -lnsl -ls -lxcurses -lnsl
    >- -L/usr/local/lib -lXext -lX11 -lSM -lICE
    >~ X includes...............:
    >~ X libraries..............:
    >
    >~ Debug enabled............: light
    >~ IPv6 support.............: yes
    >~ RSA support..............: yes
    >~ SSH1 internal emulation..: yes
    >~ SSH1 fallback capability.: no
    >~ Kbd-interactive in server: yes
    >~ Submethods.............: passwd plugin
    >~ Kbd-interactive in client: yes
    >~ PAM support in server....: no
    >~ PAM support in client....: yes
    >~ SecurID support in server: no
    >~ SecurID support in client: yes
    >~ Kerberos5 support........: no
    >~ TCP Wrappers support.....: no
    >~ Terminal capability lib..: terminfo
    >~ X11 SECURITY extension...: no
    >
    >~ PTY Type.................: pts
    >
    >~ Installation prefix......: /opt/WVUssh
    >~ bin directory............: /opt/WVUssh/bin
    >~ sbin directory...........: /opt/WVUssh/sbin
    >~ man directory............: /opt/WVUssh/man
    >~ ssh2 etc directory.......: /etc/ssh2
    >~ PID-file directory.......: default


  • Next message: Mark Leisher: "Re: cron'ing rsync over ssh"

    Relevant Pages

    • RE: SSH 3.2.3 - Problem executing Make
      ... The problem with staying with AIX 4.3.3 is that it goes unsupported at the end of this year. ... The results you get from the compile are NOT ... allow the specified action. ... seem to support any 32 bit type" ...
      (SSH)
    • Re: SSH 3.2.3 - Problem executing Make
      ... thanks very much for compiling... ... allow the specified action. ... seem to support any 32 bit type" ... >~ Terminal capability lib..: terminfo ...
      (SSH)
    • Re: AIX support
      ... > my software to display his results on an AIX machine. ... > I thought I could do this, but it seems that the paths to all the BLT, ... > to be able to compile my code and an interpreter together, ... ActiveTcl EE does support AIX, but BLT is certainly an issue. ...
      (comp.lang.tcl)