RE: Corporate SSH for IRIX

From: Tim Leong (tim.leong@ansys.com)
Date: 02/13/03

  • Next message: Pham Tuan-TPHAM4: "RE: X11 forwarding help"
    From: Tim Leong <tim.leong@ansys.com>
    To: "'patrick.mcneil@umontreal.ca'" <patrick.mcneil@umontreal.ca>, Tim Leong <tim.leong@ansys.com>
    Date: Thu, 13 Feb 2003 11:05:19 -0500
    
    

    A little more information about this problem. Connections to the server do
    not fail if I use the IP address in the ssh command. It only fails when I
    use the hostname. The client's /etc/hosts file has a correct entry for the
    ssh server and nsswitch is set to files then dns.

    -----Original Message-----
    From: Patrick McNeil [mailto:mcneilp@ESI.UMontreal.CA]
    Sent: Wednesday, February 12, 2003 4:34 PM
    To: Tim Leong
    Cc: 'secureshell@securityfocus.com'
    Subject: Re: Corporate SSH for IRIX

    Hi Tim.

    We are presently at 3.2.2 (educational), but we have been
    using ssh (from ssh.com) since around 2.4 and it works. We
    have about 20 SGI machines - from Challenge L to Origin 2000
    as far as hardware goes and software mostly at 6.5.16.

    We compile it with cc from SGI rather than gcc and use
    'internal://sftp-server' for subsystem-sftp (3.x before 3.2
    gave us sftp problems).

    The kind of warning you have usually is seen when the target
    machine is up but there is nothing listening at the ssh
    port, so you might want to make sure the daemon is running.

    If everything fails, post more information (machine, version
    of os, etc.).

    Good luck.

    Patrick McNeil

    On Wed, 12 Feb 2003, Tim Leong wrote:

    > We recently purchased corporate SSH 3.1.0 and are now having problems
    > installing it on any of our Irix boxes. I've logged a call with SSH and
    > they say that they don't support it. We can compile the source fine, and
    on
    > some machines we can even finish the make install. But when we try to run
    > ssh on the client, we get this error:
    >
    > warning: Connecting to <hostname> failed: TCP/IP Failure
    >
    > Has anyone ever compiled, installed and ran this version on an SGI
    > successfully?
    >
    > Thanks.
    >
    > -Tim
    >

    -- 
    Patrick McNeil Université de Montréal - DGTIC
    PP, X-216  Téléphone: (514) 343-6111, poste 5247
    Courriel: Patrick.McNeil@umontreal.ca
    Téléavertisseur: (514) 423-1081,
       mcneilp@paget.dgtic.umontreal.ca
    

  • Quantcast