[NT] Atmel SNMP Non Public Community String DoS Vulnerability

From: support@securiteam.com
Date: 12/25/01


From: support@securiteam.com
To: list@securiteam.com
Date: Tue, 25 Dec 2001 22:15:51 +0100 (CET)

The following security advisory is sent to the securiteam mailing list, and can be found at the SecuriTeam web site: http://www.securiteam.com
- - promotion

When was the last time you checked your server's security?
How about a monthly report?
http://www.AutomatedScanning.com - Know that you're safe.
- - - - - - - - -

  Atmel SNMP Non Public Community String DoS Vulnerability
------------------------------------------------------------------------

SUMMARY

During some tests, it was noted that the 1.3 version firmware contains a
flaw that may result in a denial-of-service, preventing any new further
request to be correctly handled by the device.

DETAILS

Vulnerable systems:
Atmel Firmware 1.3

If an SNMP read request is made with a community name different than
"public" (including NULL community string) or an unknown OID, it leads to
a denial of service even if the answer is correct (i.e. the returned code
error in the reply is ok). Any SNMP request made to the Wireless Access
Point is then denied. Reset of the appliance is necessary to recover
normal functioning.

Vendor status:
Linsys was contacted October 30, 2001 and answered. They say that the 1.3
firmware for the WAP11 is a somewhat dated release. The current shipping
version is 1.4g.5.

Workaround:
The vendor suggested the following: "for customers that have earlier
versions, new code is available on our ftp site:
<ftp://ftp.linksys.com/pub/network/wap11fw14g5.exe>
ftp://ftp.linksys.com/pub/network/wap11fw14g5.exe.

The new utility is also required to use this firmware, also available on
our ftp site : <ftp://ftp.linksys.com/pub/network/wap11sw.exe>
ftp://ftp.linksys.com/pub/network/wap11sw.exe.

These links are also published on our website at:
<http://www.linksys.com/download/firmware.asp>
http://www.linksys.com/download/firmware.asp under the wap11 section from
the drop down."

ADDITIONAL INFORMATION

The information has been provided by
<mailto:frederic.brouille@vigilante.com> Frederic Brouille.

========================================

This bulletin is sent to members of the SecuriTeam mailing list.
To unsubscribe from the list, send mail with an empty subject line and body to: list-unsubscribe@securiteam.com
In order to subscribe to the mailing list, simply forward this email to: list-subscribe@securiteam.com

====================
====================

DISCLAIMER:
The information in this bulletin is provided "AS IS" without warranty of any kind.
In no event shall we be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages.



Relevant Pages

  • Re: DLINK 614+ - SOHO routers, system DOS
    ... the flaws reported to DLINK on May 24th and posted to bugtraq have ... Rev A's latest firmware available is still 2.30 and therefore IS ... | left in an unstable state immediately followed by a system reboot. ... | along with the request or if no ip address is available for dynamic ...
    (Bugtraq)
  • asynchronous I/O problem with KMDF
    ... internal workflow or due to known firmware bugs. ... When the framework deliver a new request to my default ... it is requeued to the sequential queue otherwise. ... DeviceIoControl call. ...
    (microsoft.public.development.device.drivers)
  • Re: XP USB driver stack/lost bytes on bulk transfer
    ... I think there is another bug in the scanner's firmware that causes it to ... > faster the usb device driver, the more bytes it must request each ...
    (microsoft.public.development.device.drivers)
  • Re: I/O operation has been aborted
    ... I'm currently running the latest firmware available in NA, ... korean instructions). ... aborted because of either a thread exit or an application request." ...
    (microsoft.public.windowsmedia.player)