Expiration of your subscription to the NTBUGTRAQ list



Mon, 27 Feb 2006 06:01:13

Your subscription to the NTBUGTRAQ list has expired and you have failed
to confirm it in the 14 day delay that you had been granted. You have
therefore been automatically removed from the list. You can re-subscribe
to the list, if you want to, by sending the following command to
LISTSERV@xxxxxxxxxxxxxxxxxxxxxx:

SUBscribe NTBUGTRAQ



Relevant Pages

  • Re: How to create a "delay" service?
    ... batch file, the NET START command failed. ... :: Note: this causes a small extra delay! ... The Server service is dependent on the iSCSI service, ...
    (microsoft.public.windows.server.setup)
  • Re: Pausing/Waiting in C
    ... of "events" to be popped off, separated by a command to pause reading off ... only clock() is part of the ANSI Standard. ... If you're trying to implement a delay and all you have available ...
    (comp.lang.c)
  • Re: ide-cd problem
    ... > getting the exact same symptoms I got with 2.6.9 before upping the delay to ... the command before seems to have an expectation of a 2048 ... and once the transfer has taken place with DRQ not asserted and rq len having ... any really definitive statement on DRQ assertion in this case. ...
    (Linux-Kernel)
  • Re: Commodore 64 "SPEED=" setting?
    ... If you set SPEED.P00 so that VICE recognizes it, you can use the following command to load the machine-code: ... where delay can be 0-255 ... sta delay ... lda #<newroutine ...
    (comp.sys.cbm)
  • Re: micro SD persistently slower after programming and reboot
    ... sync; sync; sync ... Is the delay in the read routine after you set the card into SPI ... partition that is written with the 'dd' command prior to the reboot. ...
    (comp.arch.embedded)