[Full-disclosure] Cisco Security Advisory: Cisco Application Extension Platform Privilege Escalation Vulnerability
- From: Cisco Systems Product Security Incident Response Team <psirt@xxxxxxxxx>
- Date: Wed, 09 Jun 2010 12:00:00 -0400
-----BEGIN PGP SIGNED MESSAGE-----
Cisco Security Advisory: Cisco Application Extension Platform Privilege
Advisory ID: cisco-sa-20100609-axp
For Public Release 2010 June 09 1600 UTC (GMT)
The Cisco Application Extension Platform contains a privilege escalation
vulnerability in the tech support diagnostic shell that may allow an
authenticated user to obtain administrative access to a vulnerable Cisco
Application Extension Platform module. Cisco has released free software updates
that address this vulnerability. There is no workaround for this vulnerability.
This advisory is posted at:
The following products are affected by this vulnerability:
* Cisco Application Extension Platform version 1.1
* Cisco Application Extension Platform version 1.1.5 if upgraded from
Products Confirmed Not Vulnerable
The following products are not affected by this vulnerability:
* Cisco Application Extension Platform version 1.0
* Cisco Application Extension Platform version 1.1.5 if upgraded from version
1.0 or a clean installation
* Cisco Application Extension Platform version 1.1.7
* Cisco Application Extension Platform version 1.5.x
No other Cisco products are currently known to be affected by this
The Cisco Application Extension Platform (AXP) allows third-party applications
to be hosted on Cisco Integrated Services Routers (ISR). A privilege escalation
vulnerability exists in command-line interface of the the tech support
diagnostic shell that may allow an authenticated user to obtain complete
administrative access to vulnerable Cisco AXP module. The tech support shell is
accessed using the "techsupport support shell" command.
Authenticated Cisco AXP users can use an application programming interface
(API) to execute commands on the Cisco ISR that is hosting the AXP module. It
may be possible for an AXP user to obtain sensitive configuration information
that allows the user to gain access to the ISR device. Cisco AXP version 1.5
requires that a user be configured in the ISR configuration before the AXP user
can execute commands using the API.
This vulnerability is documented in Cisco Bug ID CSCtb65413 and has been
assigned the Common Vulnerabilities and Exposures (CVE) ID CVE-2010-1572.
Vulnerability Scoring Details
Cisco has provided scores for the vulnerability in this advisory based on the
Common Vulnerability Scoring System (CVSS). The CVSS scoring in this Security
Advisory is done in accordance with CVSS version 2.0.
CVSS is a standards-based scoring method that conveys vulnerability severity
and helps determine urgency and priority of response.
Cisco has provided a base and temporal score. Customers can then compute
environmental scores to assist in determining the impact of the vulnerability
in individual networks.
Cisco has provided an FAQ to answer additional questions regarding CVSS at:
Cisco has also provided a CVSS calculator to help compute the environmental
impact for individual networks at:
CSCtb65413 - AXP techsupport shell privilege escalation vulnerabilities
CVSS Base Score - 9
Access Vector - Network
Access Complexity - Low
Authentication - Single
Confidentiality Impact - Complete
Integrity Impact - Complete
Availability Impact - Complete
CVSS Temporal Score - 7.4
Exploitability - Functional
Remediation Level - Official-Fix
Report Confidence - Confirmed
Successful exploitation of the vulnerability may allow an authenticated user to
obtain complete administrative access to a vulnerable Cisco Application
Extension Platform module.
Software Versions and Fixes
When considering software upgrades, also consult http://www.cisco.com/go/psirt
and any subsequent advisories to determine exposure and a complete upgrade
In all cases, customers should exercise caution to be certain the devices to be
upgraded contain sufficient memory and that current hardware and software
configurations will continue to be supported properly by the new release. If
the information is not clear, contact the Cisco Technical Assistance Center
(TAC) or your contracted maintenance provider for assistance.
There is no workaround for this vulnerability.
Obtaining Fixed Software
Cisco has released free software updates that address this vulnerability. Prior
to deploying software, customers should consult their maintenance provider or
check the software for feature set compatibility and known issues specific to
Customers may only install and expect support for the feature sets they have
purchased. By installing, downloading, accessing or otherwise using such
software upgrades, customers agree to be bound by the terms of Cisco's software
license terms found at:
or as otherwise set forth at Cisco.com Downloads at:
Do not contact psirt@xxxxxxxxx or security-alert@xxxxxxxxx for software
Cisco Application Extension Platform software version 1.1.7 and later contain
fixed software that corrects this vulnerability. Cisco Application Extension
Platform software version 1.1.7 can be downloaded at the following link:
Customers with Service Contracts
Customers with contracts should obtain upgraded software through their regular
update channels. For most customers, this means that upgrades should be
obtained through the Software Center on Cisco's worldwide website at:
Customers using Third Party Support Organizations
Customers whose Cisco products are provided or maintained through prior or
existing agreements with third-party support organizations, such as Cisco
Partners, authorized resellers, or service providers should contact that
support organization for guidance and assistance with the appropriate course of
action in regards to this advisory.
The effectiveness of any workaround or fix is dependent on specific customer
situations, such as product mix, network topology, traffic behavior, and
organizational mission. Due to the variety of affected products and releases,
customers should consult with their service provider or support organization to
ensure any applied workaround or fix is the most appropriate for use in the
intended network before it is deployed.
Customers without Service Contracts
Customers who purchase direct from Cisco but do not hold a Cisco service
contract, and customers who purchase through third-party vendors but are
unsuccessful in obtaining fixed software through their point of sale should
acquire upgrades by contacting the Cisco Technical Assistance Center (TAC). TAC
contacts are as follows.
* +1 800 553 2447 (toll free from within North America)
* +1 408 526 7209 (toll call from anywhere in the world)
* e-mail: tac@xxxxxxxxx
Customers should have their product serial number available and be prepared to
give the URL of this notice as evidence of entitlement to a free upgrade. Free
upgrades for non-contract customers must be requested through the TAC.
for additional TAC contact information, including localized telephone numbers,
and instructions and e-mail addresses for use in various languages.
Exploitation and Public Announcements
The Cisco PSIRT is not aware of any public announcements or malicious use of
the vulnerability described in this advisory. This vulnerability was reported
to Cisco by n.runs AG.
Status of this Notice: FINAL
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF
GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS
LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO
CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A stand-alone copy or Paraphrase of the text of this document that omits the
distribution URL in the following section is an uncontrolled copy, and may lack
important information or contain factual errors.
This advisory is posted on Cisco's worldwide website at:
In addition to worldwide web posting, a text version of this notice is
clear-signed with the Cisco PSIRT PGP key and is posted to the following e-mail
and Usenet news recipients.
Future updates of this advisory, if any, will be placed on Cisco's worldwide
website, but may or may not be actively announced on mailing lists or
newsgroups. Users concerned about this problem are encouraged to check the
above URL for any updates.
| Revision | 2010-June-09 | Initial puiblic |
| 1.0 | | release. |
Cisco Security Procedures
Complete information on reporting security vulnerabilities in Cisco products,
obtaining assistance with security incidents, and registering to receive
security information from Cisco, is available on Cisco's worldwide website at:
This includes instructions for press inquiries regarding Cisco security
notices. All Cisco security advisories are available at:
-----BEGIN PGP SIGNATURE-----
-----END PGP SIGNATURE-----
Full-Disclosure - We believe in it.
Hosted and sponsored by Secunia - http://secunia.com/
- Prev by Date: [Full-disclosure] Cisco Security Advisory: Vulnerabilities in Cisco Unified Contact Center Express
- Next by Date: [Full-disclosure] CA20100608-01: Security Notice for CA PSFormX and WebScan ActiveX Controls
- Previous by thread: [Full-disclosure] Cisco Security Advisory: Vulnerabilities in Cisco Unified Contact Center Express
- Next by thread: [Full-disclosure] CA20100608-01: Security Notice for CA PSFormX and WebScan ActiveX Controls