Re: [Full-disclosure] Maybe not a disclosure but request for information.

Valdis.Kletnieks_at_vt.edu
Date: 04/27/05

  • Next message: iDEFENSE Labs: "[Full-disclosure] iDEFENSE Labs Releases dltrace"
    To: Leif Ericksen <leife@dls.net>
    Date: Wed, 27 Apr 2005 13:32:11 -0400
    
    
    
    

    On Wed, 27 Apr 2005 12:18:56 CDT, Leif Ericksen said:

    > cards. I do not know if this is a Qlogics, fAStT or combo issue, BUT one
    > day you might be able to see your SAN the next day you reboot and you
    > loose the SAN!

    OK. Now rephrase it as a computer security issue, so it's on-topic. We may
    drift off-topic on occasion, but what *vulnerability* is involved here,
    other than the fact that QLogics gear does a better job of fellating donkeys
    than actually doing what they were designed to do?

    
    

    
    

    _______________________________________________
    Full-Disclosure - We believe in it.
    Charter: http://lists.grok.org.uk/full-disclosure-charter.html
    Hosted and sponsored by Secunia - http://secunia.com/



  • Next message: iDEFENSE Labs: "[Full-disclosure] iDEFENSE Labs Releases dltrace"

    Relevant Pages

    • 2.6.x stability and oddity tale (Promise ATA/SATA, reiserfs/ext3, spontaneous reboots)
      ... to swap in 2 SATA drives instead of the Promise card connected ATA ... it crash and reboot again, ... 36GB SCSI drives forming a MD RAID1 locally and a SAN on the FC-AL card. ... in behavior between ext3 and reiserfs. ...
      (Linux-Kernel)
    • Re: system down - cant find luns
      ... >rebooted and the other servers connected to it are working fine. ... >One server still doesn't see the filesystem located on the SAN. ... >SCSI Device Information: ... It could also be that the reboot has found the lun but the kernel is ...
      (comp.unix.aix)
    • [HPADM] HP-UX connected to a EMC CX700 SAN
      ... Sometimes when we reboot or replace or update the firmware on a Cisco switch in our SAN fabric it causes the drive names to change in HP-UX. ... We can run ioscan and insf and powermt and get good paths to the new drives and then remove the old paths and reboot and it is ok?. ...
      (HP-UX-Admin)
    • Re: CentOS 4.4, QLogic SAN issue
      ... SAN Box switch. ... if I create the LVM partitions it all works properly until a reboot - ... in Documentation/ (any kernel source tree) which explains ... moving fast and there aren't that much people using san storage? ...
      (comp.os.linux.hardware)
    • Re: system down - cant find luns (correction)
      ... presenting the luns to the problem box and are you using SANSurfer? ... >> One server still doesn't see the filesystem located on the SAN. ... >> time I reboot. ...
      (RedHat)