IPsec with Racoon2
- From: "fred bloggs" <johnryan_852@xxxxxxxxxxx>
- Date: Tue, 09 May 2006 07:08:07 +0000
Hi,
I tried posting this to FreeBSD-questions and to freebsd-security (while not a member) and haven't had any replies.
I'm trying to get IPsec running between 2 FreeBSD boxes, using racoon2.
I was originnaly using vmware systems, but in order to eliminate vmware as a cause, I've moved it to a native machine.
spmd and iked start up okay, but I get an error when I try a ping across the tunnel.
/var/log/messages shows:
May 5 13:52:36 biosa-vm4 iked: [INTERNAL_ERR]: if_spmd.c:726: SLID failed: 550 Operation failed
May 5 13:52:36 biosa-vm4 iked: [INTERNAL_ERR]: isakmp.c:647:isakmp_initiate_cont(): 0:172.20.36.55[0] - 172.20.36.52[0]:0x0:can't find selector (index (null))
The startup shows:
2006-05-05 13:53:54 [INFO]: main.c:269:main(): starting iked for racoon2 20051102a
2006-05-05 13:53:54 [INFO]: main.c:272:main(): OPENSSLDIR: "/etc/ssl"
2006-05-05 13:53:54 [INFO]: main.c:282:main(): reading config /usr/local/etc/racoon2.conf
2006-05-05 13:53:54 [DEBUG]: ike_conf.c:3247:ike_conf_check_consistency(): checking configuration
2006-05-05 13:53:54 [DEBUG]: if_spmd.c:350: spmd I/F connection ok: 220 F8A......76C2B9
2006-05-05 13:53:54 [DEBUG]: cfsetup.c:3306: spmd_read_password_file([/usr/local/etc/racoon2/spmd.pwd], [cfsetup.c:3376], 1)
2006-05-05 13:53:54 [DEBUG]: cfsetup.c:3351: read 16 bytes
20
06-05-05 13:53:54 [DEBUG]: if_spmd.c:413: spmd LOGIN ok: 250 OK
2006-05-05 13:53:54 [INFO]: isakmp.c:339:isakmp_open(): socket 5 bind 172.20.36.55[500]
uname -a shows: Running FreeBSD-STABLE via cvsup
FreeBSD zengyu.nowhere.com 6.1-RC FreeBSD 6.1-RC #0: Fri Apr 28 12:36:37 CEST 2006
Heres my network: The host has 2 network cards are functional.
ifconfig_rl0="inet 172.20.36.55 netmask 0xfffff800"
ifconfig_xl0="inet 192.168.4.1 netmask 0xffffff00"
# _______________________ _______________________
# / Ext IP A.B.C.D \ tunnel / Ext IP W.X.Y.Z \
# ---| Int IP 192.168.1.1/24 |===============| Int IP 192.168.4.1/24 |---
# \_______________________/ \_______________________/
# For host "A.B.C.D"
# gif_interfaces="gif0"
# gifconfig_gif0="A.B.C.D W.X.Y.Z"
# ifconfig_gif0="inet 192.168.1.1 192.168.4.1 netmask 0xffffffff"
# static_routes="vpn"
# route_vpn="-net 192.168.4.0/24 192.168.4.1"
gif_interfaces="gif0"
gifconfig_gif0="172.20.36.55 172.20.36.52"
ifconfig_gif0="inet 192.168.4.1 192.168.1.1 netmask 0xffffffff"
static_routes="vpn"
route_vpn="-net 192.168.1.0/24 192.168.1.1"
Without IPsec running, I can ping the remote interfaces 192.168.[14].1 both ways
My racoon2.conf looks like:
setval {
PSKDIR "/usr/local/etc/racoon2/psk";
CERTDIR "/usr/local/etc/racoon2/cert";
};
# interface info
interface
{
ike {
MY_IPV4%rl0;
};
spmd {
unix "/var/run/racoon/spmif";
};
spmd_password "/usr/local/etc/racoon2/spmd.pwd";
};
# resolver info
resolver
{
resolver off;
};
#
# default section
#
default
{
remote {
ikev2 {
logmode normal;
kmp_sa_lifetime_time infinite;
kmp_sa_lifetime_byte infinite;
max_retry_to_send 3;
interval_to_send 10 sec;
times_per_send 1;
kmp_sa_nego_time_limit 60 sec;
ipsec_sa_nego_time_limit 40 sec;
kmp_enc_alg { aes256_cbc; 3des_cbc; };
kmp_hash_alg { hmac_sha1; hmac_md5; aes_xcbc; };
kmp_auth_method { dss; };
kmp_dh_group { 1; 2; 5; 14; 15; };
random_pad_content on;
random_padlen on;
max_padlen 50 bytes;
};
};
policy {
ipsec_mode tunnel;
ipsec_level unique; # Not Yet Implemented, always 'unique'
};
ipsec {
ipsec_sa_lifetime_time infinite;
ipsec_sa_lifetime_byte infinite;
};
sa {
esp_enc_alg { aes128_cbc; 3des_cbc; };
esp_auth_alg { hmac_sha1; hmac_md5; };
};
};
ipsec ipsec_ah_esp {
ipsec_sa_lifetime_time 28800 sec;
sa_index { ah_01; esp_01; };
};
ipsec ipsec_esp {
ipsec_sa_lifetime_time 28800 sec;
sa_index esp_01;
};
sa ah_01 {
sa_protocol ah;
ah_auth_alg { hmac_sha1; hmac_md5; };
};
sa esp_01 {
sa_protocol esp;
esp_enc_alg { aes128_cbc; 3des_cbc; };
esp_auth_alg { hmac_sha1; hmac_md5; };
};
# biosa-vm1.ch.genedata.com
remote biosa-vm1.nowhere.com {
acceptable_kmp { ikev2; };
ikev2 {
my_id fqdn "biosa-vm4.nowhere.com";
peers_id fqdn "biosa-vm1.nowhere.com";
peers_ipaddr 172.20.36.52 port 500;
kmp_enc_alg { aes256_cbc; aes192_cbc; 3des_cbc; };
kmp_prf_alg { hmac_md5; hmac_sha1; aes128_cbc; };
kmp_hash_alg { hmac_md5; hmac_sha1; aes_xcbc; };
kmp_dh_group { 5; };
kmp_auth_method { psk; };
pre_shared_key "${PSKDIR}/secret.psk";
};
selector_index 42;
};
selector 41 {
direction outbound;
src 172.20.36.55;
dst 172.20.36.52;
upper_layer_protocol "tcp";
policy_index TUNNEL;
};
selector 42 {
direction inbound;
dst 172.20.36.52;
src 172.20.36.55;
upper_layer_protocol "tcp";
policy_index TUNNEL;
};
policy TUNNEL {
action auto_ipsec;
remote_index biosa-vm1.nowhere.com;
ipsec_mode tunnel;
ipsec_index { ipsec_esp; };
ipsec_level unique;
peers_sa_ipaddr 172.20.36.52;
my_sa_ipaddr 172.20.36.55;
};
Anyone got any idea what I'm doing wrong?
Thanks in advance
John Ryan
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
_______________________________________________
freebsd-security@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-security
To unsubscribe, send any mail to "freebsd-security-unsubscribe@xxxxxxxxxxx"
- Follow-Ups:
- Re: IPsec with Racoon2
- From: Mikhail Goriachev
- Re: IPsec with Racoon2
- Prev by Date: RE: Jails and loopback interfaces [SOLVED]
- Next by Date: Re: IPsec with Racoon2
- Previous by thread: IPsec with racoon2
- Next by thread: Re: IPsec with Racoon2
- Index(es):
Relevant Pages
|
|
