[fw-wiz] 2 PIXes with their interfaces sharing the same switch and on the same VLAN.



Hi all,

I have some problem that I need some solution/advice :)

I have two PIX'es
* PIX A WAN is connected to Provider A
* PIX B WAN is connected to Provider B
* PIX A inside interface has the IP address of 10.15.1.1
* PIX B DMZ interface has the IP address of 10.15.1.2
* PIX B inside interface has the IP address of 10.17.1.1
* Subnet mask for all of the IP addresses 255.255.0.0 or /16

I disabled nat by way of nat 0 access-list to both PIXes and the interfaces
as well (except the WAN).
I have a "ip permit any any" applied to all interfaces except the WAN,

A user with IP 10.17.1.2 has a gateway of 10.17.1.1 is able to ping a server
in 10.15.1.10 (the server has a gateway of 10.15.1.1) but is unable to ssh
to the server.
But if I changed the gateway of the server to 10.15.1.2, then the user is
able to ssh to the server.

What am I doing wrong here?

Thank you so much in advance for the help.

Regards,
Rudy
_______________________________________________
firewall-wizards mailing list
firewall-wizards@xxxxxxxxxxxxxxxxxxxxx
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards