Re: [fw-wiz] Multicast between two Pix

I am sorry I don't have time this morning to research this, but here is a URL that is pretty good I use and has a base configuration.

http://helpdesk.wisc.edu/ns/page.php?id=5604

Hope this helps,

Chris Myers
clmmacunix@xxxxxxxxxxx

John 1:17
For the Law was given through Moses; grace and truth were realized through Jesus Christ.


TIFF image

Go Vols!!!!

On Feb 13, 2008, at 2:13 PM, Vladislav Antolik wrote:

Hello,

I have 2 Cisco PIX with 7.2(1) image.

Pix 1 has Net_A, Net_B, Net_C, Net_D.
Pix 2 has Net_D, Net_E, Net_F, Net_G.

Net_D is just cross cable between these devices. Through this net I
would like to setup multicasting.
I need permit multicast e.g. from Net_A to Net_F and vice versa
through this cross cable.
It's enough to setup igmp join-group x.x.x.x on all interfaces and permit ACL?
Is it any possibility to do it?

Many thanks,

Vladislav
_______________________________________________
firewall-wizards mailing list
firewall-wizards@xxxxxxxxxxxxxxxxxxxxx
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards

_______________________________________________
firewall-wizards mailing list
firewall-wizards@xxxxxxxxxxxxxxxxxxxxx
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards