Re: [fw-wiz] Anyone out there running PIX 515 ? - Trying todeterm nenewest IOS I can run
- From: "Horvath, Kevin M." <KEVIN.M.HORVATH@xxxxxxxx>
- Date: Mon, 19 Jun 2006 11:25:49 -0400
Lack of RAM is usually the culprit for those reboots. Also if I remember
correctly the 515 is EOL and only comes with minimal RAM (32 MB I believe),
so I would also recommend an upgrade. Good luck.
Kevin M. Horvath
CISSP, CCSP, INFOSEC, CCNA, CQS (ASA/FW, VPN, HIPS/IDS)
SAIC Integrated Security and Systems
703.868.1503
_____
From: firewall-wizards-bounces@xxxxxxxxxxxxxxxxxxxxx
[mailto:firewall-wizards-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of
Kristine Duncan
Sent: Monday, June 19, 2006 9:20 AM
To: Firewall Wizards Security Mailing List
Subject: Re: [fw-wiz] Anyone out there running PIX 515 ? - Trying
todetermnenewest IOS I can run
I am running v.7 on my 515. The only issue I had was to upgrade to 64MB -
easy enough fix.
Kristine
-----Original Message-----
From: James Burns [mailto:terminallyconfused@xxxxxxxxx]
Sent: Monday, June 19, 2006 5:13 AM
To: Firewall Wizards Security Mailing List
Subject: Re: [fw-wiz] Anyone out there running PIX 515 ? - Trying todetermne
newest IOS I can run
Hi Charles,
Not entirely the same, but I've recently upgraded a 535 to version 7. I've
just checked the release notes, and they say that it is possible to install
version 7 for a 515, with the following requirements:
Min. Software Requirements: PIX version 6.2. If running on a version prior
to 6.2, you must first upgrade to 6.2 before upgrading to version 7.
Min. Memory: 64MB for Restricted (R) licence. 128MB for Unrestricted (UR) or
Failover (FO) licences. I think the 515 (by default) had 32MB for R
licences, and 64MB for UR and FO, so you may need to upgrade here.
Everything else should be fine.
Hope this helps.
Kind regards,
James
James Burns
Network & Security Advisor
University of Sunderland
On 17/06/06, Charles Norton <cnorton@xxxxxxxxxxxxxxxxxx
<mailto:cnorton@xxxxxxxxxxxxxxxxxx> > wrote:
I have noticed that Cisco shows up to a version 7.2(1) version now of the
IOS for the PIX 515 and a corresponding 5.2(1) of the ASDM.
Without a CCO I cannot get into their site to verify this and to grab the
newest updates if they exist - anyone have any idea about this?
Anyone used those versions before on the PIX 515?
Thanks,
Charles
_______________________________________________
firewall-wizards mailing list
firewall-wizards@xxxxxxxxxxxxxxxxxxxxx
<mailto:firewall-wizards@xxxxxxxxxxxxxxxxxxxxx>
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards
<https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards>
_______________________________________________
firewall-wizards mailing list
firewall-wizards@xxxxxxxxxxxxxxxxxxxxx
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards
- Prev by Date: Re: [fw-wiz] Anyone out there running PIX 515 ? - Trying todetermne newest IOS I can run
- Next by Date: Re: [fw-wiz] PIX 6.x - Acces rules on a VPN tunnel.
- Previous by thread: Re: [fw-wiz] Anyone out there running PIX 515 ? - Trying todetermne newest IOS I can run
- Next by thread: [fw-wiz] (no subject)
- Index(es):
Relevant Pages
|