RE: [fw-wiz] Pix VPN endpoint and split-tunnel

From: Brian Loe (knobdy_at_stjoelive.com)
Date: 10/27/05

  • Next message: Julian M D: "Re: [fw-wiz] The Death Of A Firewall" 
    To: <cpw@inetx.com>, "'Hughes, Chris'" <Chris.Hughes@thalescomminc.com>
Date: Wed, 26 Oct 2005 21:31:35 -0500

    Where can I find a good description of hub and spoke? I use CiscoWorks at
    work, when I absolutley have to, but not so much for our VPN concentrators
    and PIX endpoints...
    >
    > PIX 7.0 supports hub and spoke VPN routing, but only hub and
    > spoke; I don't think you can generically turn around and send
    > data UNENCRYPTED out of the same interface it came in -- only
    > encrypted.
    >

    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards

  • Next message: Julian M D: "Re: [fw-wiz] The Death Of A Firewall"

    Relevant Pages

    • Re: rim life.. questions...
      ... If one cracked off at the hub, ... >> jamming the front wheel. ... >> soldering but that might have happened anyway with paired spoking, ... at spoke crossings. ...
      (rec.bicycles.tech)
    • Re: Radial on DS!?
      ... wheel will be radially laced on the drive side. ... all have honking great highly wind-up resistant hub bodies. ... better drive side spoke bracing angle. ... If shimano did there homework on their wheels why did they switch from ...
      (rec.bicycles.tech)
    • Re: spoke lacing and profile crank question
      ... > The radial stiffness is almost purely a function of spoke length. ... > However, the stiffness of the 'rigid' parts of the wheel (hub, ... >> if four-cross causes weird spoke angles at the hub or rim, ... One effect of different crossing patterns is that tangentiality ...
      (rec.sport.unicycling)
    • Re: Radial or cross spokes for front wheels, etc ?
      ... Otehwise hub woulb be a 24H Ultegra. ... Spoke holes are like the perforated edge of a check in a checkbook. ... With a tight clearance racing bike, ... Good luck with this wheel. ...
      (rec.bicycles.tech)
    • Re: rim life.. questions...
      ... Hub attachment has always been a problem until someone decided to leave out more than half the spokes. ... to keep the long thick spoke from jamming the front wheel. ... It got rid of tying and soldering but that might have happened anyway with paired spoking, itself a reversion to 115 years ago. ...
      (rec.bicycles.tech)