RE: [fw-wiz] Pix 501 & 506 PixOS 7.0 compatability

From: Paul Melson (pmelson_at_gmail.com)
Date: 10/26/05

  • Next message: Brian Loe: "RE: [fw-wiz] Pix VPN endpoint and split-tunnel" 
    To: "'Jimmy Sadri'" <jimmys@myesn.com>, <firewall-wizards@honor.icsalabs.com>
Date: Wed, 26 Oct 2005 16:57:31 -0400

    -----Original Message-----
    Subject: [fw-wiz] Pix 501 & 506 PixOS 7.0 compatability

    > Does anyone on this list know if Cisco
    > is ever planning a 7.0 release for the 501 and 506 Pix hardware? I was a
    Beta tester for
    > 7.0 when it was in the Beta stage and when I asked them about it (back in
    March) they said
    > that there would be support for the 501 and 506 in a follow on release but
    they didn't say
    > when. I was wondering if anyone has any info on when or if this will ever
    happen?

    The official line from Cisco is that 515/515E, 525, and 535 will be
    supported by 7.0 with a memory upgrade. 501, 506/506E, and 520 are not
    supported:

    "The PIX 501 is not supported in software Version 7.0(1)."
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_installation_
    guide_chapter09186a00803d243f.html

    "The PIX 506 and the PIX 506E are not supported in software Version 7.0(1)."
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_installation_
    guide_chapter09186a00803d2454.html

    "The PIX 520 is not supported in software Version 7.0(1)."
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_installation_
    guide_chapter09186a00803d245e.html

    PaulM

    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards

  • Next message: Brian Loe: "RE: [fw-wiz] Pix VPN endpoint and split-tunnel"