[fw-wiz] cant connect to port 80
From: Brent Clark (bclark_at_eccotours.dyndns.org)
Date: 08/17/05
- Previous message: Warrington Bruce - bwarri: "[fw-wiz] RE: Arch questions"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
To: firewall-wizards@honor.icsalabs.com Date: Wed, 17 Aug 2005 21:57:10 +0200
Hi list
I have my routing rules as so
/sbin/ip route add 196.36.10.113 dev eth0 src 196.36.10.114 table IS
/sbin/ip route add default via 196.36.10.113 table IS
/sbin/ip route add 192.168.10.200 dev eth2 src 192.168.10.100 table TELKOM
/sbin/ip route add default via 192.168.10.200 table TELKOM
/sbin/ip route add 196.36.10.113 dev eth0 src 196.36.10.114
/sbin/ip route add 192.168.10.200 dev eth2 src 192.168.10.100
/sbin/ip route add default via 196.36.10.113
/sbin/ip rule add from 196.36.10.114 table IS
/sbin/ip rule add from 192.168.10.100 table TELKOM
/sbin/ip rule add fwmark 1 table TELKOM
apart from the rest of my firewall ruleset
I have an entry as :
$IPT -t nat -A PREROUTING -i eth1 -t mangle -p tcp --dport 80 -j MARK --set-mark 1
$IPT -t filter -A FORWARD -i eth1 -o eth2 -m multiport -p tcp --dport 80,443 -m state --state NEW -j ACCEPT
My browser cant seem to connect to a webserver.
Probally a routing issue, as I see that I dont get any messages in syslog of FORWARD complaining.
If anyone could help, it would be most appreciated.
Kind Regards
Brent Clark
_______________________________________________
firewall-wizards mailing list
firewall-wizards@honor.icsalabs.com
http://honor.icsalabs.com/mailman/listinfo/firewall-wizards
- Previous message: Warrington Bruce - bwarri: "[fw-wiz] RE: Arch questions"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
Relevant Pages
|
