[fw-wiz] PIX Transparent proxy

From: Juan Pablo Feria (feria_at_tpitic.com.mx)
Date: 10/22/04

  • Next message: Matthew Powell: "Re: [fw-wiz] PIX Books" 
    To: firewall-wizards@honor.icsalabs.com
Date: Fri, 22 Oct 2004 12:13:38 -0700

    Hi..

    I want to use "Transparent proxy" with a PIX using squid cache

    on the squid documentation tells about routers, but the configuration
    commands are not on the pix...

    http://www.squid-cache.org/Doc/FAQ/FAQ-17.html#ss17.5

    On pix documentation appears commands to communicate with Websense and
    other commercial products...

    Anyone has any ideas to send the port 80 requests to the squid box?

    Thanks in advance.

    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards

  • Next message: Matthew Powell: "Re: [fw-wiz] PIX Books"

    Relevant Pages

    • RE: [fw-wiz] PIX Transparent proxy
      ... could the squid box run in a 'bridged' mode proxying all ... communications from the local LAN to the PIX - ie make it the default ... communicate with the PIX. ...
      (Firewall-Wizards)
    • Re: BIND 9 Problem - DNS Forwarding
      ... If DNS responds normally take a look at the squid ... I setup my squid with delay pools to take 80% of our bandwith ... My PIX keeps getting Input Packet Errors (the number of errors keeps ...
      (Fedora)
    • Re: PIX to replace router
      ... :like to replace with a PIX. ... Then you get your various overhead commands like controlling remote ssh ...
      (comp.dcom.sys.cisco)
    • Re: [fw-wiz] PIX Transparent proxy
      ... >> commands are not on the pix... ... >packets to a cache based on the port, protocol or any other ACL match) ... It appears the PIX will do a static PAT in order to ...
      (Firewall-Wizards)
    • Re: Cisco PIX 501 port forwarding trouble
      ... i did a configuration reset on the pix before inputing your commands. ... did not do a clear xlate, ...
      (comp.dcom.sys.cisco)