[fw-wiz] Cisco PIX query

From: ADSL-Nerd (adslnerd_at_pacific.net.sg)
Date: 02/23/04

  • Next message: Patrick M. Hausen: "Re: [fw-wiz] Allowing relay through Watchguard Firebox 1000"
    To: <firewall-wizards@honor.icsalabs.com>
    Date: Mon, 23 Feb 2004 10:03:49 +0800
    
    

    Hi guys,

    I've got a query on Cisco PIX, here's the background info:

    Cisco PIX 515, 6.22

    I've got the following static mapping in the PIX as seen below:

    static (inside,outside) 203.82.170.93 102.165.2.9 netmask 255.255.255.255 0 0 static (inside,outside) 203.82.170.91 102.165.2.7 netmask 255.255.255.255 0 0

    I'm trying to map the two public IPs 203.82.170.93 and 203.82.170.91 to the same private IP 102.165.2.9 (Technically this is not possible).

    IP 203.82.170.93 is permitted for 443 (SSL)
    IP 203.82.170.91 is permitted for 25 (SMTP)

    Is it possible to perform NAT/PAT as seen below: (If there's such commands)

    static (inside,outside) 203.82.170.93 TCP 443 102.165.2.9 TCP 443 netmask 255.255.255.255 0 0 static (inside,outside) 203.82.170.91 TCP 25 102.165.2.9 TCP 25 netmask 255.255.255.255 0 0

    Any other ways to do this in PIX?

    Please advice.

    Thanks.
    James

    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards


  • Next message: Patrick M. Hausen: "Re: [fw-wiz] Allowing relay through Watchguard Firebox 1000"