RE: [fw-wiz] NAT inside a VPN between PIX and Cisco device

From: Bill James (bubbagates_at_comcast.net)
Date: 01/19/04

  • Next message: Paul Robertson: "Re: [fw-wiz] Blocking IRC ...." 
    To: "'Allendes Fernando'" <fallendes@atichile.com>, <firewall-wizards@honor.icsalabs.com>
Date: Sun, 18 Jan 2004 21:57:52 -0500

    Fernado

    Try this link for a start

    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configura
    tion_example09186a0080094498.shtml

     

    -----Original Message-----
    From: firewall-wizards-admin@honor.icsalabs.com
    [mailto:firewall-wizards-admin@honor.icsalabs.com] On Behalf Of Allendes
    Fernando
    Sent: Monday, January 12, 2004 5:29 PM
    To: 'firewall-wizards@honor.icsalabs.com'
    Subject: [fw-wiz] NAT inside a VPN between PIX and Cisco device

    Hello:
            We are trying to make a VPN between PIX and Cisco device, but
    using NAT with the PIX external IP. The picture is like:
      Internal IP ----> PIX (NAT) ----> Internet ----> Cisco Router --->
    "Routeable IP"
            Because the Cisco Router have internal and routeable networks,
    then we must make a VPN from PIX using NAT inside the VPN.
            At least, we set up such VPN but using two external IPs in the
    PIX.
            Do you know how we can do it using only one external IP in the
    PIX ?

    Regards,
    Fernando Allendes.
    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards

    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards

  • Next message: Paul Robertson: "Re: [fw-wiz] Blocking IRC ...."

    Relevant Pages