RE: [fw-wiz] Cisco PIX DHCP relay via IPSEC

From: Melson, Paul (PMelson_at_sequoianet.com)
Date: 10/24/03

  • Next message: Bruce Smith: "[fw-wiz] ISA Firewall Config Transfer" 
    To: "Scot Kreienkamp" <Scot@pc-sos.net>, <firewall-wizards@honor.icsalabs.com>
Date: Fri, 24 Oct 2003 09:02:49 -0400

    Probably. In order to do this you would have to add a line to the
    crypto map match access-list for traffic from the firewall's *outside*
    interface to the DHCP server on the other end.

    PaulM

    -----Original Message-----
    If that's the case then could I forward the DHCP requests across the
    IPSEC tunnel?

    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards

  • Next message: Bruce Smith: "[fw-wiz] ISA Firewall Config Transfer"

    Relevant Pages

    • Re: Conflicting uses of "ip dhcp-server" -- design flaw?
      ... The DHCP process runs as a whole in the router/switch. ... assigned via the ip dhcp server command and the server is reachable via the ... routing table or directed connected interface and a the router/switch ... I can specify a helper-address, ...
      (comp.dcom.sys.cisco)
    • Re: ntpq no longer working -
      ... interface to the device, if you find the web interface doesn't get ... If your DHCP server was on your Linux box, ... Etherape isn't one I'm familiar with. ...
      (Fedora)
    • Problems with Router/Firewall and cable modem
      ... I've been using Adelphia's "PowerLink" cable modem service for about three ... I installed a LinkSys router ... I'm also using the Netscreen as my DHCP server for ... interface, and the old LinkSys's WAN interface (yes I drug it back out to ...
      (comp.security.misc)
    • [SLE] mass deployment using DHCP without need to reconfig int
      ... One machine had Suse manually installed on it and configured for our network. ... DHCP was set up on this machine, the DHCP server has all 200 machines MAC to IP ... The machine boots and is mostly happy except it can not configure the interface as ... set the master image to use DHCP and all the cloned machines worked as expected. ...
      (SuSE)
    • Re: DHCP for multiple subnets (was: Re: Routing and bandwidth problem)
      ... >The DHCP server shouldn't care what interface the request came in on, ... >rather it looks at the source network of the request. ... the network interface on which the request arrived at the router. ...
      (Fedora)