Re: [fw-wiz] Sniffing DSL Connection

From: Chuck Swiger (chuck_at_codefab.com)
Date: 09/14/03

  • Next message: Ben Nagy: "Re: [fw-wiz] Sniffing DSL Connection"
    To: Jeff_Lopes@groove.net
    Date: Sun, 14 Sep 2003 12:50:51 -0400
    
    

    Jeff_Lopes@groove.net wrote:
    [ ... ]
    > DSL Modem ---> Linksys Router ---> Internal Machines
    >
    > In an attempt to sniff traffic going to and from the linksys router ... I
    > added a hub:
    >
    > DSL Modem ---> Hub ---> Linksys Router ---> Internal Machines
    >
    > I then put a Linux machine on the hub and ran ethereal. No traffic!
    >
    > Any thoughts?

    Do you have a real IP address from the DSL modem, or does your Linksys do PPPOE?
      If it's the latter, all of the IP traffic is being encapsulated within PPP--
    ethereal should still see the traffic, but trying to match by IP addr will fail.

    If you multihome the Linux machine, you should be able to do PPPOE on one
    interface and sniff the traffic on the other...

    -- 
    -Chuck
    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards
    

  • Next message: Ben Nagy: "Re: [fw-wiz] Sniffing DSL Connection"

    Relevant Pages

    • Re: [SLE] trying to set up ip forwarding and masqurading...
      ... PPPOE performed by the Linksys router. ... i WANT all the internet to go through the server for various reasons. ... and i want to see how much bandwidth each person in the network is ...
      (SuSE)
    • Re: Selectin 10/100 full/half duplex
      ... > get pppoe to work with the NIC. ... > hub, it connects at 100 speed of course, but wont connect to pppoe, if i ... Many of the ethernet cards can have their speeds restricted using options ... switch between the 10mhz ports and the 100mhz ports - When a port changes ...
      (comp.os.linux.networking)
    • Selectin 10/100 full/half duplex
      ... I need to be able to select 10/100 and possibly full/half duplex speeds to ... get pppoe to work with the NIC. ... hub, it connects at 100 speed of course, but wont connect to pppoe, if i put ... a 10 base hub in there is no problems, or directly to the dsl modem it ...
      (comp.os.linux.networking)
    • Re: host cant attach to small network
      ... > linksys router. ... Be careful about using the uplink port on the hub. ... chaining another hub or switch. ...
      (comp.os.linux.networking)
    • Mozilla 1.6 slow resolving sites
      ... Linux machine all connected through a Linksys router to the cable modem. ... The network connection seems fine. ...
      (alt.os.linux.suse)