Re: [fw-wiz] PIX 6.3.2 Upgrade?

From: Steve Saeedi (saeedi_at_ebrary.com)
Date: 08/13/03

  • Next message: Crispin Cowan: "Re: [fw-wiz] Off Topic: 802.11 Dongles" 
    To: "Crissup, John (MBNP is)" <John.Crissup@us.millwardbrown.com>
Date: Wed, 13 Aug 2003 09:49:10 -0700

    I received this from Cisco today. If you have a CCO account, you can
    refer to the following:

    Title: Field Notice:PIX OS 6.3(2) Deferral - NAT 0 Translation Loss

    URL: http://www.cisco.com/warp/customer/770/fn26155.shtml
    Posted:August 11, 2003

    Summary:PIX release 6.3(2) correctly executes nat 0 address translation
    rules
    entered in the configuration terminal or stored in the startup
    configuration.
    However, such commands are not recorded in the running configuration.

    On Monday, August 11, 2003, at 11:38 AM, Crissup, John (MBNP is) wrote:

    > Still running 6.2.1 on two PIX 520's in failover mode (using serial
    > cable
    > only, not LAN based). Thinking about upgrading these to 6.3.2.
    > Anyone know
    > of any outstanding issues or horror stories that I should be aware of?
    > Any
    > input anyone has would be appreciated. Thanks!
    >
    > --
    > John

    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards

  • Next message: Crispin Cowan: "Re: [fw-wiz] Off Topic: 802.11 Dongles"

    Relevant Pages

    • Re: Can you regulate Quartz
      ... Do you refer to a "sunset" even though the horizon is going up? ... dunno, the sun disappears behind some hills when it goes down, ... output voltage at the wiper) configuration? ... see at times has been done by an "engineer", ...
      (alt.horology)
    • RE: Restore
      ... Refer to this KB Article for more details. ... Regards ... M. Rajesh ...
      (microsoft.public.windowsxp.perform_maintain)
    • RE: Reverse Lookup blocks outboud mail
      ... I suggest you refer to the following article to ... If the configuration is incorrect, ... PLEASE NOTE the newsgroup SECURE CODE and PASSWORD were ... by entering the secure code mmpng06 when prompted. ...
      (microsoft.public.exchange.admin)
    • Re: memory
      ... Either refer to the documentation for your ... MB or go to the manufacturers web-site to obtain information on RAM. ... >> Did you do the memory upgrade or did someone else?..THAT person would ... >> yourself what configuration is needed. ...
      (microsoft.public.windowsxp.perform_maintain)
    • Re: Adapter configuration settings
      ... How to call multiple computers -- list in textfile ... Refer: ... How to set new IP configuration ... > I need to write a script that will read machine names from a text file, ...
      (microsoft.public.windowsxp.wmi)
    • Quantcast