RE: [fw-wiz] OS 6.3

From: Michael K. Jones (mkjones@cisco.com)
Date: 03/25/03

  • Next message: Eric Appelboom: "RE: [despammed] RE: [fw-wiz] OS 6.3"
    From: "Michael K. Jones" <mkjones@cisco.com>
    To: "'Melson, Paul'" <PMelson@sequoianet.com>, "'Dave Rinker <firewall@dsrtech.com>@AICNOTES'" <IMCEANOTES-Dave+20Rinker+20+3Cfirewall+40dsrtech+2Ecom+3E+40AICNOTES@sequoianet.com>, <firewall-wizards@honor.icsalabs.com>
    Date: Tue, 25 Mar 2003 11:57:30 -0800
    

    Hi everyone

    We plan to release PIX OS 6.3 this week to CCO, hopefully later today.

    Rgds,
    Mike

    -----Original Message-----
    From: firewall-wizards-admin@honor.icsalabs.com
    [mailto:firewall-wizards-admin@honor.icsalabs.com] On Behalf Of Melson,
    Paul
    Sent: Tuesday, March 25, 2003 6:22 AM
    To: Dave Rinker <firewall@dsrtech.com>@AICNOTES;
    firewall-wizards@honor.icsalabs.com
    Subject: RE: [fw-wiz] OS 6.3

    Was that March '04? :-) Anyway, for those who want to know more, here's
    the official 6.3 data sheet:

    http://www.cisco.com/en/US/partner/products/sw/secursw/ps2120/products_d
    ata_sheet09186a0080148714.html

    As of this morning, though, there's no 6.3 available for download from
    CCO Software Center.

    PaulM

    > -----Original Message-----
    > From: Dave Rinker <firewall@dsrtech.com>@AICNOTES
    > Sent: Monday, March 24, 2003 7:16 PM
    > To: firewall-wizards@honor.icsalabs.com
    > Subject: [fw-wiz] OS 6.3
    >
    >
    >
    > received word from my account rep that PIX 6.3 should be out by march
    > 17th.
    >
    > I've seen a demo and one of the best features looks like the numbered
    > ACL.
    >
    > access-list 101 line 1 deny ip 0.0.0.0 255.0.0.0 any
    > access-list 101 line 2 deny ip 127.0.0.0 255.0.0.0 any
    > access-list 101 line 3 deny ip 10.0.0.0 255.0.0.0 any
    > access-list 101 line 4 deny ip 192.168.0.0 255.255.0.0 any
    >
    >
    > so you can insert into the mix by specifying the line number! no more
    > removing the whole ACL to move a line up the stack!
    >
    > also, this version supports transparent IPSec through PAT/NAT.
    > with "isakmp nat-traversal" - same as new version of router IOS.
    >
    >
    >
    > I HAVE SEEN THE TOP OF THE MOUNTAIN, AND IT IS GOOD.
    >
    >
    >
    > _______________________________________________
    > firewall-wizards mailing list
    > firewall-wizards@honor.icsalabs.com
    > http://honor.icsalabs.com/mailman/listinfo/firewall-wizards
    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards
    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards


  • Next message: Eric Appelboom: "RE: [despammed] RE: [fw-wiz] OS 6.3"

    Relevant Pages

    • Re: PIX 501 VPN - I can ping but cant map a drive
      ... packets between the one inside host 192.168.0.250 and the "outside" ... was not coming in via VPN. ... the inside_outbound_nat0_acl ACL, ... >I'm trying to set up a VPN connection from a PC outside the PIX 501 into ...
      (comp.dcom.sys.cisco)
    • Cisco PIX / CS ACS: Downloadable RADIUS ACLs vulnerability
      ... When an administrator creates an ACL on the Cisco Secure Access Control ... The protocol used by the PIX to download the ACL works as follows: ... PIX sends Radius Access-Request to CS ACS to authenticate the user (the ... configured to use the very same CS ACS server for login authentication ...
      (comp.dcom.sys.cisco)
    • RE: [fw-wiz] PIX Firewall IP Addresses
      ... If you decide to upgrade to the new versions of PIX code, ... You should be OK on memory since the requirements for 5.2 and 6.2 are the ... but some of the older PIX are no longer supported. ... Conduits and ACL formats can technically live ...
      (Firewall-Wizards)
    • Re: PIX 6.3 - capture command
      ... ACL will automatically be matched in reverse for the remote traffic. ... Using a specific port number on an crypto map ACL will get you a warning ... Earlier PIX versions prohibitted using ... :I use the "capture" command to check if the VPN is going ok. ...
      (comp.dcom.sys.cisco)
    • Re: [fw-wiz] pix and syslog
      ... I don't know of any newlines issues. ... You are using the relatively new PIX ACL logging feature. ... >i have a pix version 6.3.1 configured to log via syslog on an HP-UX server. ...
      (Firewall-Wizards)