RE: [fw-wiz] Nortel Contivity Firewall

From: Nathan (nathan.grandbois@cerdant.com)
Date: 02/28/03

  • Next message: George Capehart: "Re: [fw-wiz] Webex and the like"
    From: "Nathan" <nathan.grandbois@cerdant.com>
    To: "'Tim Chettle'" <tim.chettle@orange.net>, <firewall-wizards@honor.icsalabs.com>
    Date: Thu, 27 Feb 2003 18:34:02 -0500
    

    I would say you'd need to point the tunnel at the public IP address of
    device B.

    -nathan

    > >-----Original Message-----
    > >From: firewall-wizards-admin@honor.icsalabs.com
    > >[mailto:firewall-wizards-admin@honor.icsalabs.com]On Behalf Of Tim
    > >Chettle
    > >Sent: Thursday, February 27, 2003 11:56 PM
    > >To: firewall-wizards@honor.icsalabs.com
    > >Subject: [fw-wiz] Nortel Contivity Firewall
    > >
    > >
    > >I have two Contivities that I am trying to set up to build a
    > >VPN tunnel
    > >between two sites over the internet and am struggling somewhat
    > >
    > >Site B has a Contivity 1700 located in a DMZ on a Checkpoint
    > >Firewall1
    > >Site A has a Contivity 1700 operating as both a Firewall and
    > >a VPN device
    > >
    > >We can create the Tunnell from site A to Site B but not the
    > >other way around
    > >
    > >My rule on Site B's device is to allow IKE and IPSEC into the network
    > >located on the private Network which i think is wrong I
    > >think that they
    > >should be allowed onto the Device itself however i am
    > >confused as to what
    > >that object actually is.
    > >
    > >is it the Private address the Public One or the managment address
    > >
    > >
    > >Thanks
    > >
    > >
    > >_______________________________________________
    > >firewall-wizards mailing list
    > >firewall-wizards@honor.icsalabs.com
    > >http://honor.icsalabs.com/mailman/listinfo/firewall-wizards
    > >

    _______________________________________________
    firewall-wizards mailing list
    firewall-wizards@honor.icsalabs.com
    http://honor.icsalabs.com/mailman/listinfo/firewall-wizards



    Relevant Pages

    • [fw-wiz] Nortel Contivity Firewall
      ... I have two Contivities that I am trying to set up to build a VPN tunnel ... Site B has a Contivity 1700 located in a DMZ on a Checkpoint Firewall1 ... located on the private Network which i think is wrong I think that they ...
      (Firewall-Wizards)
    • Contivity 221 problem
      ... I'm having a hard time getting a Contivity 221 to set up a Branch Office ... The config is ABOT. ... Everything appears to be programmed correctly but the tunnel won't ...
      (comp.dcom.sys.nortel)
    • Re: Contivity 221 problem
      ... The config is ABOT. ... Everything appears to be programmed correctly but the tunnel won't ... The tunnel will come up if I use a fixed WAN address on the Contivity 221. ...
      (comp.dcom.sys.nortel)
    • Re: Contivity 221 problem
      ... tunnel to a Contivity 1050. ... The config is ABOT. ... Everything appears to be programmed correctly but the tunnel won't ...
      (comp.dcom.sys.nortel)
    • RE: frequent vpn tunnel drops
      ... Ensure that the subnets you are trying to route through the VPN tunnel are ... Attached is the log of the concentrator,sometimes it ... > Received remote IP Proxy Subnet data in ID Payload: ...
      (Security-Basics)