CERT Advisory CA-2002-01 Exploitation of Vulnerability in CDE Subprocess

From: CERT Advisory (cert-advisory@cert.org)
Date: 01/14/02

Date: Mon, 14 Jan 2002 12:01:46 -0500 (EST)
From: CERT Advisory <cert-advisory@cert.org>
To: cert-advisory@cert.org


CERT Advisory CA-2002-01 Exploitation of Vulnerability in CDE Subprocess
Control Service

   Original release date: January 14, 2002
   Last revised: --
   Source: CERT/CC

   A complete revision history can be found at the end of this file.

Systems Affected

     * Systems running CDE


   The CERT/CC has received credible reports of scanning and exploitation
   of Solaris systems running the CDE Subprocess Control Service buffer
   overflow vulnerability identified in CA-2001-31 and discussed in

I. Description

   Since CA-2001-31 was originally released last November, the CERT/CC
   has received reports of scanning for dtspcd (6112/tcp). Just recently,
   however, we have received credible reports of an exploit for Solaris
   systems. Using network traces provided by The Honeynet Project, we
   have confirmed that the dtspcd vulnerability identified in CA-2001-31
   and discussed in VU#172583 is actively being exploited.

   The Common Desktop Environment (CDE) is an integrated graphical user
   interface that runs on UNIX and Linux operating systems. The CDE
   Subprocess Control Service (dtspcd) is a network daemon that accepts
   requests from clients to execute commands and launch applications
   remotely. On systems running CDE, dtspcd is spawned by the Internet
   services daemon (typically inetd or xinetd) in response to a CDE
   client request. dtspcd is typically configured to run on port 6112/tcp
   with root privileges.

   There is a remotely exploitable buffer overflow vulnerability in a
   shared library that is used by dtspcd. During client negotiation,
   dtspcd accepts a length value and subsequent data from the client
   without performing adequate input validation. As a result, a malicious
   client can manipulate data sent to dtspcd and cause a buffer overflow,
   potentially executing code with root privileges. The overflow occurs
   in a fixed-size 4K buffer that is exploited by the contents of one of
   the attack packets. The signature can be found at bytes 0x3e-0x41 in
   the following attack packet from a tcpdump log (lines may wrap):

   09:46:04.378306 > P 1:1449(1448) ack
   1 win 16060 <nop,nop,timestamp 463986683 4158792> (DF)
   0x0000 4500 05dc a1ac 4000 3006 241c 0a0a 0a01
   0x0010 0a0a 0a02 0e08 17e0 fee2 c115 5f66 192f
   0x0020 8018 3ebc e1e9 0000 0101 080a 1ba7 dffb
   0x0030 003f 7548 3030 3030 3030 3032 3034 3130
   0x0040 3365 3030 3031 2020 3420 0000 0031 3000
   0x0050 801c 4011 801c 4011 1080 0101 801c 4011
   0x0060 801c 4011 801c 4011 801c 4011 801c 4011

   The value 0x103e in the ASCII (right) column above is interpreted by
   the server as the number of bytes in the packet to copy into the
   internal 4K (0x1000) buffer. Since 0x103e is greater than 0x1000, the
   last 0x3e bytes of the packet will overwrite memory after the end of
   the 4K buffer. This is the same compromise vector identified in

   It is important to note that several Internet-enabled games may also
   use port 6112/tcp as a legitimate part of their normal operation,
   therefore, not all network activity involving this service may be
   malicious. Network administrators monitoring this type of activity may
   wish to verify whether probes of this type are actually attempts to
   exploit VU#172583.

   Many common UNIX systems ship with CDE installed and enabled by
   default. To determine if your system is configured to run dtspcd,
   check for the following entries (lines may wrap):

   in /etc/services

      dtspc 6112/tcp

   in /etc/inetd.conf

      dtspc stream tcp nowait root /usr/dt/bin/dtspcd

   Any system that does not run the CDE Subprocess Control Service is not
   vulnerable to this problem.

II. Impact

   An attacker can execute arbitrary code with root privileges.

III. Solution

Apply a patch

   VU#172583 contains information from vendors who have provided
   information for this advisory. We will update the vulnerability note
   as we receive more information. If a vendor's name does not appear,
   then the CERT/CC did not hear from that vendor. Please contact your
   vendor directly.

   Vendor information can be found in the "Systems Affected" section of


Limit access to vulnerable service

   Until patches are available and can be applied, you may wish to limit
   or block access to the Subprocess Control Service from untrusted
   networks such as the Internet. Using a firewall or other
   packet-filtering technology, block or restrict access to the port used
   by the Subprocess Control Service. As noted above, dtspcd is typically
   configured to listen on port 6112/tcp. It may be possible to use TCP
   Wrapper or a similar technology to provide improved access control and
   logging functionality for dtspcd connections. Keep in mind that
   blocking ports at a network perimeter does not protect the vulnerable
   service from the internal network. It is important to understand your
   network configuration and service requirements before deciding what
   changes are appropriate.

   TCP Wrapper is available from


Disable vulnerable service

   You may wish to consider disabling dtspcd by commenting out the
   appropriate entry in /etc/inetd.conf. As a best practice, the CERT/CC
   recommends disabling any services that are not explicitly required. As
   noted above, it is important to consider the consequences of such a
   change in your environment.

Appendix A. - References

    1. http://www.kb.cert.org/vuls/id/172583
    2. http://www.cert.org/advisories/CA-2001-31.html
    3. http://cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2001-0803
    4. http://xforce.iss.net/alerts/advise101.php
    5. http://www.opengroup.org/cde/
    6. http://www.opengroup.org/desktop/faq/

   The CERT Coordination Center thanks The Honeynet Project for their
   assistance in providing network traces of the exploitation.

   Authors: Allen Householder and Art Manion

   This document is available from:

CERT/CC Contact Information

   Email: cert@cert.org
          Phone: +1 412-268-7090 (24-hour hotline)
          Fax: +1 412-268-6989
          Postal address:
          CERT Coordination Center
          Software Engineering Institute
          Carnegie Mellon University
          Pittsburgh PA 15213-3890

   CERT/CC personnel answer the hotline 08:00-17:00 EST(GMT-5) /
   EDT(GMT-4) Monday through Friday; they are on call for emergencies
   during other hours, on U.S. holidays, and on weekends.

    Using encryption

   We strongly urge you to encrypt sensitive information sent by email.
   Our public PGP key is available from


   If you prefer to use DES, please call the CERT hotline for more

    Getting security information

   CERT publications and other security information are available from
   our web site


   To subscribe to the CERT mailing list for advisories and bulletins,
   send email to majordomo@cert.org. Please include in the body of your

   subscribe cert-advisory

   * "CERT" and "CERT Coordination Center" are registered in the U.S.
   Patent and Trademark Office.

   Any material furnished by Carnegie Mellon University and the Software
   Engineering Institute is furnished on an "as is" basis. Carnegie
   Mellon University makes no warranties of any kind, either expressed or
   implied as to any matter including, but not limited to, warranty of
   fitness for a particular purpose or merchantability, exclusivity or
   results obtained from use of the material. Carnegie Mellon University
   does not make any warranty of any kind with respect to freedom from
   patent, trademark, or copyright infringement.

   Conditions for use, disclaimers, and sponsorship information

   Copyright 2001 Carnegie Mellon University.

   Revision History

   January 14, 2002: Initial release

Version: PGP 6.5.8


Relevant Pages